Ali Indistries Inc
Ali Industries 7030 3x18 120-Grit Aluminum Oxide Belt 5-Pack
Five-pack of 3-by-18-inch 120-grit aluminum oxide belts for power sanders
- TypeSanders
- Bi-directional joint enables smooth operation in both directions
- Resin bonding resists heat and humidity for longer belt life
- 120-grit aluminum oxide suits heavy-duty sanding and grinding
- Works on wood, metal, fiberglass and painted surfaces
- Five belts per pack for extended use
Ali Industries 7030 Belt Pack
The Ali Industries 7030 pack contains five aluminum oxide sanding belts sized at 3 by 18 inches. They are built for power belt sanders and carry a 120-grit rating. The bi-directional flush joint lets the belt run smoothly in either direction. Resin bonding resists heat and humidity to extend belt life.
Woodworkers and metalworkers doing heavy-duty
These belts suit users who need aggressive material removal on wood, metal, fiberglass or painted surfaces. They are not for finish-sanding tasks that demand a finer grit. They are also not for owners of sanders that require a different belt width or length.
Fits standard 3x18 power belt sanders
Installation follows the normal tension-and-track procedure for 3 by 18 inch belts. The bi-directional joint removes the need to check arrow orientation. The most common issue is mistracking if the sander rollers are worn or misaligned, which can cause the belt to slip or tear at the joint.
Highlights
- Bi-directional joint enables smooth operation in both directions
- Resin bonding resists heat and humidity for longer belt life
- 120-grit aluminum oxide suits heavy-duty sanding and grinding
- Works on wood, metal, fiberglass and painted surfaces
- Five belts per pack for extended use
Specifications
| Type | Sanders |
|---|---|
| Brand | Ali Industries |
Questions about this item
What size belt sander do I need for the 3 x 18 inch belts?
You need a power belt sander that accepts a 3-inch wide by 18-inch long sanding belt.
Will the bi-directional flush joint work on my older sander that runs only one way?
Yes, the joint is designed to run smoothly in both directions, so it also works on single-direction sanders.
How can I confirm the resin bond is holding up during heavy use?
The belt should not shed grit or delaminate when sanding wood, metal, fibreglass or painted surfaces under load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
