Ali Indistries Inc
Ali Indistries Inc 2098 120 Grit Coarse Sandpaper 25 Pack 4244
Waterproof silicon-carbide sheets for wet sanding between finish coats, 120 grit coarse grade, 25 pack
- Type2098
- Waterproof sheets enable wet sanding between coats
- Resin coating extends abrasive life beyond standard glue bonds
- 120 grit coarse grade suits paint, sealer and varnish prep
- Silicon carbide material provides sharp, consistent cutting action
- 25 sheets per box at 9 x 11 inches each
What this pack contains
The Ali Industries 2098 pack supplies 25 sheets of 120 grit coarse silicon-carbide sandpaper measuring 9 x 11 inches. It is intended for DIYers and tradespeople who wet-sand between coats of paint, sealer or varnish.
Check before you buy
Confirm that 120 grit coarse is the correct grade for the finish you are preparing. Ensure your project calls for wet sanding, as the resin coating is designed for use with water or solvent. Verify you have storage space for 25 full-size sheets.
Build and daily use
Sheets are resin bonded so the abrasive stays intact longer than glue-bond alternatives during wet work. The 9 x 11 inch format fits standard hand blocks and most orbital sanders without trimming. Silicon carbide cuts cleanly on hard finishes and resists clogging when kept wet.
Highlights
- Waterproof sheets enable wet sanding between coats
- Resin coating extends abrasive life beyond standard glue bonds
- 120 grit coarse grade suits paint, sealer and varnish prep
- Silicon carbide material provides sharp, consistent cutting action
- 25 sheets per box at 9 x 11 inches each
Specifications
| Brand | Ali Ind. |
|---|---|
| Type | 2098 |
Questions about this item
Does the pack contain only the 25 sheets or is a sanding block included?
The box holds 25 sheets of 9 In. x 11 In. 120 Grit silicon carbide paper; a sanding block or holder must be purchased separately.
How do I decide between this 120 Grit coarse grade and a finer or coarser option?
Choose the 120 Grit coarse sheets when you need fast material removal between coats of paint, sealer or varnish; switch to a higher grit number for final smoothing or a lower number for heavier stock removal.
What does the 120 Grit rating mean when I am wet-sanding a painted surface?
The 120 Grit silicon carbide cuts quickly through old finish layers while the waterproof resin bond resists clogging, letting you level orange peel or runs before applying the next coat.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
