We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack-mount switch with 48 RJ-45 ports and SFP+ uplinks

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 2360-P48X 48 Port Gig PoE+ 740W 2x 10G SFP+ network switch

SKU CH-V46H-22T9K

48 Gigabit PoE+ ports with a 740 W budget plus two 10G SFP+ uplinks and stacking for high-density networks

  • 48 Gigabit PoE+ ports power cameras and access points
  • 740 W PoE budget feeds every port at full 802.3at power
  • Two 10G SFP+ uplinks give 10 Gbps backbone speed
  • Two SFP+ stacking ports let multiple units act as one switch
  • 1RU rack-mount design fits dense cabinet deployments

High-density PoE+ access switch

The Alcatel-Lucent OmniSwitch 2360-P48X is a 1RU rack-mountable Layer 2 switch built for corporate networks that need both density and high power delivery. It provides 48 RJ-45 ports running at 10/100/1000 Base-T, each capable of 802.3at PoE+ to drive Wi-Fi 6 access points, IP cameras and VoIP endpoints. A 740 W total PoE budget is supplied by an integrated high-capacity internal AC power supply. Two dedicated 10G SFP+ uplinks and two SFP(+) stacking ports handle aggregation and resilience.

Suited for powered-edge deployments.

This switch fits environments where many powered devices must connect at the access layer and a single chassis must supply the full 740 W budget without external injectors. WebSmart+ management gives browser-based control for VLANs, QoS and security policies. Organisations that require Layer 3 routing, advanced CLI scripting or a smaller PoE budget should evaluate other platforms.

740 W PoE+ budget decides fit

The single specification that determines suitability is the 740 W total PoE+ power budget. If the combined draw of all connected cameras, access points and phones stays within this limit, the switch can power every port simultaneously; if the project exceeds it, a higher-budget chassis or additional switches are required.

Highlights

  • 48 Gigabit PoE+ ports power cameras and access points
  • 740 W PoE budget feeds every port at full 802.3at power
  • Two 10G SFP+ uplinks give 10 Gbps backbone speed
  • Two SFP+ stacking ports let multiple units act as one switch
  • 1RU rack-mount design fits dense cabinet deployments

Specifications

No published specifications for this item yet.

Questions about this item

How much heat and fan noise should I expect when the 740 W PoE budget is fully loaded all day?

The switch uses a high-capacity internal AC supply to deliver the full 740 W PoE budget; fan speed ramps with thermal load so sustained maximum draw will increase airflow and audible noise.

Which SFP+ transceivers and stacking cables do I need to buy separately to use the two 10 G uplinks and two stacking ports?

The two dedicated 10G SFP+ uplinks and two SFP(+) stacking ports accept standard SFP+ modules and direct-attach cables; choose single-mode, multimode or copper cables that match your link distances.

Will my existing 10/100/1000 Base-T devices and 802.3at PoE+ endpoints work without reconfiguration?

All 48 RJ-45 ports auto-negotiate 10/100/1000 Base-T and support 802.3at PoE+, so legacy copper devices and PoE+ cameras or access points connect and power up immediately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.