We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nylon caster wheel, three inch diameter, plain bore, non marking finish

Albion Inc.

Albion Inc. ZORO SELECT HE0304108 Caster Wheel Nylon 3 in 600 lb

SKU CH-E61R-3C2ED

A 3-inch nylon caster wheel rated for 600 lb loads with a heat-resistant, non-marking tread and 75 Shore D hardness

  • TypeWheelbarrows & Carts
  • Supports heavy loads with 600 lb rating
  • Resists heat damage through nylon tread material
  • Protects floors with non-marking wheel surface
  • Handles demanding use via 75 Shore D hardness
  • Fits standard axles with 1/2 in bore size

ZORO SELECT Heat-Resistant Nylon Caster

This 3-inch caster wheel uses a hard nylon tread rated at 75 Shore D for industrial carts and wheelbarrows. It supports a 600 lb load rating within the 300 to 999 lb range. The non-marking design protects floors while the plastic core keeps weight low. A 1/2 inch axle bore fits standard equipment without a spanner bushing.

Replacing Worn or Lower-Capacity Wheels

Upgrade when existing casters flatten, mark floors or cannot handle the 600 lb rating. The jump is worth it if your cart carries heavier loads or operates on hot surfaces where standard rubber fails. The hard nylon tread resists heat better than softer compounds. Buyers who need a higher capacity than 999 lb or a different axle size should look elsewhere.

Simple Axle Installation

Slide the wheel onto a 1/2 inch axle and secure it with your existing hardware. The 1 1/2 inch hub length matches many standard forks. No spanner bushing is included, so verify your axle length before ordering. The most common issue is discovering the axle is too short or too long for the hub after the wheel arrives.

Highlights

  • Supports heavy loads with 600 lb rating
  • Resists heat damage through nylon tread material
  • Protects floors with non-marking wheel surface
  • Handles demanding use via 75 Shore D hardness
  • Fits standard axles with 1/2 in bore size

Specifications

BrandZORO SELECT
TypeWheelbarrows & Carts

Questions about this item

What axle size does the 3 in ZORO SELECT caster wheel need?

The wheel accepts a 1/2 in axle and has a 1 1/2 in hub length for mounting.

How do I install the HE0304108 wheel without a spanner bushing?

Slide the wheel directly onto the 1/2 in axle and secure it with a retaining pin or bolt through the hub.

When should I replace the 75 Shore D nylon wheel?

Replace it when the tread shows flat spots, cracks or the wheel no longer rolls smoothly under loads up to 600 lb.

More in Other Yard Tools

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.