Albion Inc.
Albion Inc. ZORO SELECT 26Y378 6 in. Rubber Caster Wheel 400 lb
A 6-inch rubber caster wheel rated for 400 lb load capacity with a 300 lb rating and 70 Shore D hardness
- TypeWheelbarrows & Carts
- Supports up to 400 lb for heavy-duty carts
- 6 in. diameter rolls smoothly over rough ground
- 70 Shore D hardness resists wear and flat spots
- 300 lb load rating ensures reliable daily use
- 1 9/16 in. hub length fits standard axles
ZORO SELECT 6 in. Rubber Caster Wheel 400 lb
This new ZORO SELECT caster wheel fits wheelbarrows and carts that accept a six-inch diameter wheel with a one-and-a-quarter-inch tread width. It uses a plain bore sized for a three-eighths-inch axle and includes a spanner bushing to match the one-and-nine-sixteenths-inch hub length. The rubber tread has a 70 Shore D hardness for firm rolling on hard surfaces.
Check axle size and hub spacing before ordering
Verify that your equipment uses a three-eighths-inch axle and can accommodate a one-and-nine-sixteenths-inch hub length with the supplied spanner bushing. The wheel width is one-and-a-quarter inches, so the fork or bracket must clear that dimension. No non-marking claim is made, so the rubber may leave marks on light-coloured floors.
Thermals noise and power draw in normal use
As a passive rubber wheel, it generates no heat, noise or electrical draw during operation. Rolling resistance is determined by the 70 Shore D hardness and the load applied up to the 400 lb rating. The wheel carries a California Proposition 65 warning for chemicals linked to cancer and reproductive harm.
Highlights
- Supports up to 400 lb for heavy-duty carts
- 6 in. diameter rolls smoothly over rough ground
- 70 Shore D hardness resists wear and flat spots
- 300 lb load rating ensures reliable daily use
- 1 9/16 in. hub length fits standard axles
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
Does the ZORO SELECT 26Y378 caster wheel come with an axle or mounting hardware?
The wheel is sold without an axle; a spanner bushing is included for the 3/8 in axle size.
Should I select a wheel rated for 300 lb or 400 lb load capacity?
The wheel carries a 300 lb load rating within the 300 to 999 lb range; the 400 lb figure in the title is a model reference, not the rated capacity.
What does the 70 Shore D hardness mean when the wheel is on a cart?
A 70 Shore D rating indicates a hard rubber tread that resists flattening under load but transmits more vibration than softer wheels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



