Albion Inc.
Albion Inc. Zoro Select 26Y366 5 in 350 lb Polyolefin Caster Wheel
A 5-inch polyolefin caster wheel rated for 350 lb with a non-marking tread and included spanner bushing for 3/8-inch axles
- TypeWheelbarrows & Carts
- Supports 350 lb loads for heavy carts
- Non-marking polyolefin protects floor surfaces
- 65 Shore D hardness resists wear and flattening
- 5 in diameter rolls over rough ground easily
- Ready for 3/8 in axle with included bushing
5 in 350 lb Polyolefin Caster
This Albion Inc. Zoro Select 26Y366 caster wheel uses a polyolefin tread on a polypropylene core. It carries a 350 lb load rating and fits a 3/8 in axle with the included spanner bushing. The 5 in diameter wheel has a 1 1/2 in width and a 1 9/16 in hub length. Its non-marking design suits carts and wheelbarrows used on finished floors.
Upgrading from lower rated wheels
Replacing casters rated below 300 lb with this 350 lb model adds capacity for heavier loads on the same equipment. The jump is worth it when current wheels deform or fail under sustained weight. Buyers who need a load rating above 999 lb cannot use this wheel. Those requiring a different axle size or tread material must select another product.
Plain bore polyolefin limits
The plain bore with spanner bushing relies on the axle for rotation rather than an internal bearing. Polyolefin at 65 Shore D hardness resists flat-spotting but transmits more vibration than softer treads. It operates within a 300 to 999 lb load rating range for this wheel class. Environments with sustained impact or chemicals not covered by the Prop 65 notice may reduce service life.
Highlights
- Supports 350 lb loads for heavy carts
- Non-marking polyolefin protects floor surfaces
- 65 Shore D hardness resists wear and flattening
- 5 in diameter rolls over rough ground easily
- Ready for 3/8 in axle with included bushing
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What axle diameter does the 5-inch Zoro Select 26Y366 caster wheel require?
The wheel is designed for a 3/8-inch axle and includes a spanner bushing to fit that size.
How do I correctly install the spanner bushing on the 26Y366 wheel?
Press the included spanner bushing into the wheel hub before sliding the wheel onto the 3/8-inch axle; the bushing centres the wheel and prevents wobble.
When should I replace the polyolefin tread on the 26Y366 caster wheel?
Replace the wheel when the 65 Shore D tread shows flat spots, cracks or excessive wear that reduces the 350 lb load capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
