We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Akro-Mils

Akro-Mils 30098 Yellow Shelf Bin 16x5x6 in 35 lb .29 cu ft

SKU CH-YC0H-D9Z77

Yellow industrial-grade polymer shelf bin holds 35 lb with .29 cu ft capacity and seven divider slots for organisation

  • 35 lb load capacity supports heavy parts
  • 16 in inside length fits deep shelf runs
  • 5 in inside width uses narrow spacing efficiently
  • 29 cu ft volume holds generous quantities
  • Industrial grade polymer resists daily warehouse wear

Akro-Mils 30098 Yellow Shelf Bin

The Akro-Mils 30098 is a yellow industrial-grade polymer shelf bin designed for organised parts storage. It offers an inside length of 16 in, inside width of 5 in, and inside height of 5 15/16 in. The bin provides a volume capacity of .29 cu ft and supports a load capacity of 35 lb. A molded-in label area helps identify contents quickly.

Storage Needs This Bin Meets and Does Not

This bin suits workshops or warehouses needing durable, stackable containers for small components like fasteners or fittings. The seven short divider slots allow custom compartments using compatible dividers. Buyers requiring larger volume capacity or heavier load ratings than 35 lb should consider alternative storage solutions. It is not intended for liquid containment or outdoor weather exposure.

Critical Spec: 35 lb Load Capacity

The 35 lb load capacity is the key specification determining if this bin handles your parts weight. Exceeding this limit risks structural failure and unsafe stacking. Verify the weight of your typical inventory against this rating before purchase. The industrial-grade polymer construction supports this rated capacity under normal shelf use.

Highlights

  • 35 lb load capacity supports heavy parts
  • 16 in inside length fits deep shelf runs
  • 5 in inside width uses narrow spacing efficiently
  • 29 cu ft volume holds generous quantities
  • Industrial grade polymer resists daily warehouse wear

Specifications

BrandAkro Mils

Questions about this item

How do I install the 40030 divider into the 7 short slots without cracking the polymer?

Align each divider tab with a short-side slot and press straight down until the tab seats flush; forcing at an angle stresses the industrial-grade polymer walls.

When should I replace the bin if the 35 lb load rating is used daily?

Replace when the inside floor shows permanent bowing or the molded-in label area cracks, as the 0.29 cu ft volume will no longer hold parts securely.

At what point does the 16 in inside length limit what I can store side-by-side?

Items longer than 16 in cannot lie flat; they must be stood upright or placed diagonally, reducing the usable 0.29 cu ft capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.