We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular network adapter with RJ45 jack and terminal blocks

Air Hogs

Air Hogs Aiphone AXW-AVT AX Series 24VDC 500mA RJ45 Audio-Video Adapter Transmitter

SKU CH-DJ2B-9E8GQ

Transmits composite NTSC video and audio over Cat-5e up to 980 feet using 24 VDC power and an RJ45 jack

  • TypeOthers
  • Transmits composite video up to 980 feet over Cat-5e
  • Powers from 24 V DC at 500 mA for simple installation
  • Provides relay contact rated 30 V DC at 1 A for door control
  • Accepts sensor input via normally-closed contact for alarm integration
  • Connects to AX Series exchange unit through single RJ45 jack

AX Series Audio-Video Adapter Transmitter

The Aiphone AXW-AVT is an audio-video adapter and transmitter built for the AX Series exchange unit. It accepts composite NTSC video at 1Vpp and provides an N/O relay contact rated for 30V DC at 1A. The unit draws 500 mA at 24VDC and connects via an RJ45 jack using Cat-5e cable up to 980' cumulative distance.

Installers adding video to an AX Series door station

This adapter suits technicians extending an existing AX Series intercom with composite video and a single relay output. It supports Web, SNMP and Telnet protocols for network management. Buyers who need IP camera streaming, PoE power, or multiple video channels should look at a different product because this unit only handles one composite feed and requires a separate 24VDC supply.

24VDC 500 mA power requirement

The adapter must be powered from a 24VDC source capable of delivering 500 mA; without that supply the transmitter will not operate. The output voltage range of 208 to 230 V AC is also specified for the relay circuit. Confirm your power infrastructure matches these figures before ordering.

Highlights

  • Transmits composite video up to 980 feet over Cat-5e
  • Powers from 24 V DC at 500 mA for simple installation
  • Provides relay contact rated 30 V DC at 1 A for door control
  • Accepts sensor input via normally-closed contact for alarm integration
  • Connects to AX Series exchange unit through single RJ45 jack

Specifications

TypeOthers

Questions about this item

How do I wire the AXW-AVT using the RJ45 jack and Cat-5e cable?

Connect Cat-5e to the RJ45 jack for both power and video; the adapter accepts 24VDC at 500 mA and carries composite 1Vpp NTSC up to 980 ft cumulative. Do not exceed the 980 ft total run.

What relay contact rating should I plan for when the AXW-AVT drives a lock or gate?

The N/O contact output is rated 30V DC at 1A; size your load and wiring so neither voltage nor current exceeds those limits.

What is the maximum Cat-5e distance before video quality drops on the AXW-AVT?

Composite video is specified to 980 ft cumulative on Cat-5e; beyond that distance the 1Vpp NTSC signal will degrade.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.