We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PETG filament on a cardboard spool, 1.75 mm diameter

AICOPYTO Rapid PETG Filament 1.75mm Black 1kg 30-600mm/s ±0.02mm

SKU CH-25AS-9KJFX

High-speed PETG filament prints at 30-600mm/s with ±0.02mm diameter tolerance on a 1kg cardboard spool

  • Color1kg Rapid Petg Black
  • MaterialPolyethylene Terephthalate Glycol
  • Diameter1.75
  • Weight1 kilograms
  • Print up to 600 mm/s with rapid PETG formulation
  • ±0.02 mm diameter tolerance for consistent extrusion
  • Neatly wound cardboard spool reduces tangles and snapping
  • Low warping and shrinkage versus PLA for reliable prints
  • Good light transmittance with minimal stringing for clean details

1 kg Rapid PETG Filament

AICOPYTO Rapid PETG Filament in black comes on a 1 kg cardboard spool with a 1.75 mm diameter and ±0.02 mm tolerance. It is made for owners of FFF 3D printers who want a single material that prints fast and stays dimensionally accurate. The spool suits hobbyists and professionals needing consistent flow for functional parts.

Sustained high-speed printing

The filament is rated for print speeds from 30 to 600 mm/s and melts rapidly to maintain smooth extrusion during long jobs. Full mechanical winding and manual inspection reduce tangles and snapping over extended runs. Low shrinkage and good layer adhesion keep large or complex models dimensionally stable throughout the build.

Thermal behaviour and power

Extruder temperatures of 230 to 260 °C and a heated bed at 70 to 80 °C are recommended for this PETG. The material shows less warping than PLA and resists stringing at these settings. A 0.4 mm nozzle works with the specified speed and temperature range for clog-free output.

Highlights

  • Print up to 600 mm/s with rapid PETG formulation
  • ±0.02 mm diameter tolerance for consistent extrusion
  • Neatly wound cardboard spool reduces tangles and snapping
  • Low warping and shrinkage versus PLA for reliable prints
  • Good light transmittance with minimal stringing for clean details

Specifications

BrandAICOPYTO
Color1kg Rapid Petg Black
MaterialPolyethylene Terephthalate Glycol
Diameter1.75
Weight1 kilograms

Questions about this item

Will the extruder temperature of 230-260°C raise my printer's power draw or heat output during long prints?

The filament prints at 230-260°C nozzle temperature with a 70-80°C bed, so sustained power use matches any standard PETG profile on a typical FDM machine.

My printer only takes 1.75mm spools — does this 1kg cardboard spool fit without an adapter?

Yes, the 1.75mm ±0.02mm filament comes on a 1kg cardboard spool designed for almost all 1.75mm FDM printers, so no adapter is needed.

Can I run this at 600mm/s on an older printer with a 0.4mm nozzle?

The filament supports 30-600mm/s and is specified for a 0.4mm nozzle; actual top speed depends on your printer's motion system and cooling capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.