We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc plated steel 90 degree elbow swivel coupling 1/4 inch NPTF male thread 2.6 inches overall length

Aeroquip

Aeroquip FS65007-0404-01 1/4 In Zinc Steel Swivel Coupling

SKU CH-RB1C-XFMMW

A 90-degree elbow swivel coupling for 1/4 inch NPTF fluid-power lines, rated to 5,000 psi and -40 to 250 °F

  • Swivels under pressure for flexible hose routing
  • Zinc-plated steel resists corrosion in harsh environments
  • 90-degree elbow saves space in tight installations
  • Buna-N seals handle -40 °F to 250 °F range
  • Rated to 5,000 psi for demanding fluid power systems

Aeroquip 1/4 Inch Swivel Coupling

The Aeroquip FS65007-0404-01 is a zinc-plated steel swivel joint built for fluid power systems. Its 90-degree elbow shape directs flow in tight routing situations where straight fittings cannot reach.

Capacity and pressure headroom

Rated for 5,000 psi maximum operating pressure, the coupling handles high-demand hydraulic circuits with a Buna-N seal rated from -40 to 250 degrees F. The 1/4-18 NPTF male thread and 1.58 inch center-to-end length set the mechanical envelope for the connection.

Build integration and clearance

The 2.6 inch overall length and swivel action let installers orient the elbow without stressing hose or pipe runs. SAE J1176 compliance confirms the fitting meets recognised fluid power standards for steel construction.

Highlights

  • Swivels under pressure for flexible hose routing
  • Zinc-plated steel resists corrosion in harsh environments
  • 90-degree elbow saves space in tight installations
  • Buna-N seals handle -40 °F to 250 °F range
  • Rated to 5,000 psi for demanding fluid power systems

Specifications

BrandAEROQUIP

Questions about this item

Will the 1/4 In. -18 NPTF male thread on this Aeroquip swivel coupling match the female ports on my existing hydraulic hoses?

The casing connection is NPTF with a 1/4 In. -18 male thread, so it will mate with any standard 1/4 inch NPTF female port on your current hoses or adapters.

How can I verify the swivel joint is sealing correctly after I install it in a 5,000 psi fluid power system?

Pressurise the system to working pressure and inspect the Buna-N seal area; no fluid should appear at the 90-degree elbow swivel interface.

Does the box include any thread sealant or additional fittings for the 1/4 inch NPTF connection?

The package contains only the zinc-plated steel swivel coupling; thread tape, sealant or mating adapters must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.