Adb Hoist Rings
Adb Hoist Rings 33716 Heavy Duty Hoist Ring 5000 lb WLL conveying
A pivoting and swivelling alloy-steel hoist ring rated for a 5000 lb working load limit with a 3/4 in. thread
- 5000 lb working load limit for heavy lifting
- 360-degree swivel plus 180-degree pivot for flexible positioning
- alloy steel construction with black oxide finish for durability
- 100 ft-lb minimum installation torque for secure mounting
- removable bolt included for quick installation
Adb Hoist Ring 33716 5000 lb WLL
The Adb Hoist Ring 33716 is a new alloy-steel lifting point rated for a 5000 lb working load limit. It mounts with a 3/4 in.-10 screw-on thread and includes a removable bolt. The bail pivots 180 degrees and swivels 360 degrees to keep the load aligned during lifting and pulling operations.
Suited for rigging that needs full rotation
This ring suits rigging points where the load direction shifts and a fixed eye bolt would bind. It is not for applications that require a higher working load limit than 5000 lb or a thread size other than 3/4 in.-10. Buyers needing a different thread pitch or a non-pivoting anchor should look at other hardware.
Fits a 3/4 in.-10 threaded hole
Installation calls for a minimum torque of 100 ft-lb on the included bolt. The 180-degree pivot and 360-degree swivel clear surrounding structure so the bail can rotate freely under load. The black-oxide finish adds corrosion resistance in shop and field environments.
Highlights
- 5000 lb working load limit for heavy lifting
- 360-degree swivel plus 180-degree pivot for flexible positioning
- alloy steel construction with black oxide finish for durability
- 100 ft-lb minimum installation torque for secure mounting
- removable bolt included for quick installation
Specifications
| Brand | ADB HOIST RINGS |
|---|
Questions about this item
What thread size must the mounting point have for the 33716 hoist ring?
The mounting point needs a 3/4 In. -10 thread with at least 1 1/2 in of usable thread length to accept the included removable bolt.
Will the 180-degree pivot and 360-degree swivel clear a fixed overhead beam during angled lifts?
The bail pivots 180 degrees and swivels 360 degrees, so the ring aligns with the load direction and avoids binding against a stationary beam.
How do I confirm the ring is seated to the required 100 ft-lb before lifting?
Torque the removable bolt to a minimum of 100 ft-lb; the black-oxide finish and alloy-steel construction show no visible stretch when correctly preloaded.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
