Adb Hoist Rings
Adb Hoist Rings 33614 Pivot Swivel Hoist Ring 4000 lb WLL
A pivoting, 360-degree swivel hoist ring rated for 4000 lb working load limit with a 5/8-11 thread and removable bolt
- Pivots 180 degrees for angled lifting alignment
- Swivels 360 degrees to prevent load twisting
- 4000 lb working load limit handles heavy lifts
- Alloy steel construction with black oxide finish resists corrosion
- Includes removable bolt torqued to 60 ft-lb for secure mounting
Heavy-Duty Hoist Ring 4000 lb WLL
The ADB Hoist Rings 33614 is a forged alloy-steel lifting point rated for a 4000 lb working load limit. It installs with a 5/8 in.-11 thread and includes a removable bolt torqued to at least 60 ft-lb. The black-oxide finish resists corrosion during repeated lifting and pulling tasks.
Pivot Swivel Upgrade for Fixed Eyebolts
This ring replaces stationary eyebolts when the load must rotate or pivot during a lift. The bail pivots 180 degrees and swivels a full 360 degrees, preventing side-loading on the fastener. The jump is worth it whenever the rigging angle changes under tension or when a single anchor must serve multiple pull directions.
Screw-On Anchor for Structural Lifting Points
The unit mounts directly into a tapped hole or through-bolted plate with 1 in of usable thread engagement. Its compact 3 1/2 in overall length and width keep the profile low on beams, plates or machinery frames. The integrated bail measures 2 1/2 in by 1 7/8 in inside, accepting standard hooks and shackles without extra hardware.
Highlights
- Pivots 180 degrees for angled lifting alignment
- Swivels 360 degrees to prevent load twisting
- 4000 lb working load limit handles heavy lifts
- Alloy steel construction with black oxide finish resists corrosion
- Includes removable bolt torqued to 60 ft-lb for secure mounting
Specifications
| Brand | ADB HOIST RINGS |
|---|
Questions about this item
What thread size does the 33614 hoist ring require for mounting?
The ring mounts with a 5/8 In. -11 screw thread and needs 1 in of usable thread engagement.
What torque should be applied when installing the removable bolt?
Tighten the supplied bolt to at least 60 ft-lb to secure the ring before lifting.
When should the hoist ring be replaced based on wear?
Replace the unit if the bail shows deformation, the bolt threads are damaged, or the black oxide finish has worn enough to expose bare alloy steel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
