Adb Hoist Rings
Adb Hoist Rings 33401 Heavy Duty Hoist Ring conveying 15000 lb WLL
A pivoting and swivelling alloy-steel hoist ring rated for 15,000 lb working load limit with 180-degree pivot and 360-degree swivel
- Pivots 180 degrees for angled lifts
- Swivels 360 degrees to prevent load twist
- Alloy steel construction handles 15000 lb WLL
- Screw-on mount with removable bolt simplifies installation
- Black oxide finish resists corrosion in tough environments
15000 lb WLL Hoist Ring for Heavy Lifting
The ADB Hoist Rings 33401 is a new alloy steel hoist ring rated for a 15000 lb working load limit. It mounts with a 1 1/4 in. -7 screw-on thread and includes a removable bolt. The unit is designed for lifting and pulling tasks that demand a high-capacity pivoting anchor point.
Pivot and Swivel Range Limits
The ring pivots through 180 degrees and swivels a full 360 degrees, allowing the bail to align with the load direction under tension. A minimum installation torque of 470 ft-lb is required to secure the bolt properly. The black oxide finish provides corrosion resistance during use.
Thread Size Decides Fitment
The 1 1/4 in. -7 thread size and 2 5/8 in. usable thread length determine whether this ring mates with your existing tapped hole or fixture. Builders needing a different thread pitch or a lower working load limit should select another model.
Highlights
- Pivots 180 degrees for angled lifts
- Swivels 360 degrees to prevent load twist
- Alloy steel construction handles 15000 lb WLL
- Screw-on mount with removable bolt simplifies installation
- Black oxide finish resists corrosion in tough environments
Specifications
| Brand | ADB HOIST RINGS |
|---|
Questions about this item
Which capacity should I choose for the 33401 hoist ring?
The 33401 model has a single working load limit of 15000 lb, so there is no capacity choice to make for this part number.
What does the 15000 lb WLL mean when the ring is installed in a machine?
It means the ring is rated to lift or pull up to 15000 lb when the bolt is torqued to at least 470 ft-lb and the load stays within the 180 degree pivot and 360 degree swivel range.
What thread standard does the 1 1/4-7 bolt use and what does it limit?
The 1 1/4-7 UNC thread requires a minimum installation torque of 470 ft-lb, which caps the clamping force and ensures the 15000 lb WLL is achieved.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
