Adb Hoist Rings
Adb Hoist Rings 33314 hoist ring 1000 lb WLL pivot swivel alloy steel
Pivoting and swivelling alloy-steel hoist ring rated for 1000 lb working load limit with a 3/8 in. screw-on thread
- Pivots 180 degrees and swivels 360 degrees for flexible lifting angles
- 1000 lb working load limit handles heavy loads safely
- Alloy steel construction with black oxide finish resists wear and corrosion
- Screw-on mount with removable bolt simplifies installation
- Minimum installation torque of 12 ft-lb ensures secure attachment
Pivot Swivel Hoist Ring 1000 lb WLL
The Adb Hoist Rings 33314 is a pivot and swivel hoist ring rated for a 1000 lb working load limit. It is manufactured from alloy steel with a black oxide finish and mounts via a 3/8 in.-16 screw thread. The ring provides 180 degrees of pivot movement and 360 degrees of swivel rotation. A removable bolt is included for installation.
Suited for Lifting and Pulling Tasks
This hoist ring serves operators who need a secure attachment point for lifting or pulling loads up to 1000 lb. The pivot and swivel action keeps the bail aligned with the load direction during use. Buyers who require a higher working load limit or a different thread specification should look at alternative hardware. It is not designed for applications exceeding the stated capacity.
1000 lb Working Load Limit
The working load limit of 1000 lb is the primary figure that determines if this ring matches the intended load. The thread size is 3/8 in.-16 with a usable thread length of 1 in. Minimum installation torque is 12 ft-lb. Bail inside dimensions are 1 1/2 in by 1 1/4 in with a 7/16 in thickness. Overall length and width are both 2 1/4 in.
Highlights
- Pivots 180 degrees and swivels 360 degrees for flexible lifting angles
- 1000 lb working load limit handles heavy loads safely
- Alloy steel construction with black oxide finish resists wear and corrosion
- Screw-on mount with removable bolt simplifies installation
- Minimum installation torque of 12 ft-lb ensures secure attachment
Specifications
| Brand | ADB HOIST RINGS |
|---|
Questions about this item
What thread size must my mounting hole have for the 33314 hoist ring?
The hoist ring uses a 3/8 in. -16 thread and requires a minimum installation torque of 12 ft-lb.
Will the 180-degree pivot and 360-degree swivel clear obstacles on an older fixed lift point?
The ring pivots 180 degrees and swivels 360 degrees, so it can align with legacy brackets without binding.
How do I confirm the 33314 is seated correctly after torquing the removable bolt?
Verify the bolt is torqued to at least 12 ft-lb and that the bail rotates freely through the full 360-degree swivel and 180-degree pivot range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
