Adafruit
Adafruit 2 in 1 Accessory 48V 120V 4000W 8000W 91% 16.4ft 3.0A
Pure sine wave inverter converts 48V DC to 120V AC with 4000W continuous and 8000W peak power, 91% efficiency, 3.0A USB-C, LCD display and 16.4ft remote
- Reliable AC power from 48V DC with 4000W continuous output
- Handles startup surges up to 8000W peak for demanding devices
- Efficient 91% conversion reduces energy waste and heat
- 4 ft wired remote with LCD shows voltage, load and errors
- 0A USB and Type-C ports charge phones and tablets directly
48V 4000W Pure Sine Wave Inverter
This new 48V DC to 120V AC pure sine wave inverter delivers 4000W continuous power with an 8000W peak capacity for short bursts. It operates at 91% conversion efficiency and includes four AC outlets plus a 3.0A USB Type-C port for direct device charging. A 16.4 ft wired remote and LCD display show input and output voltage, battery capacity, load level and error codes for easy monitoring.
Suited for 48V battery systems in RVs trucks
Designed for users running a 48V battery bank who need clean AC power for sensitive electronics and high-startup loads. The LCD and remote simplify status checks from a distance. Not suitable for 12V vehicle electrical systems or for installations that require a different DC input voltage.
48V DC input requirement
The single specification that determines compatibility is the 48V DC input; the inverter will not operate from 12V or other voltage sources. Buyers must confirm their battery bank matches this exact input before purchase.
Highlights
- Reliable AC power from 48V DC with 4000W continuous output
- Handles startup surges up to 8000W peak for demanding devices
- Efficient 91% conversion reduces energy waste and heat
- 4 ft wired remote with LCD shows voltage, load and errors
- 0A USB and Type-C ports charge phones and tablets directly
Specifications
No published specifications for this item yet.
Questions about this item
What DC voltage source is required to power the 4000W continuous output?
A 48V DC battery bank or equivalent 48V DC supply is needed to drive the inverter at its rated 4000W continuous and 8000W peak output.
Will the four AC outlets and 3.0A USB-C port run simultaneously with a 120V AC legacy load?
Yes, the pure sine wave output delivers 120V AC across all four outlets while the USB-C port supplies up to 3.0A, so older 120V devices and USB gear can operate together within the 4000W limit.
Which values on the LCD confirm the unit is converting at the stated 91% efficiency?
The LCD shows input voltage, output voltage, battery capacity and load capacity; comparing the DC input power (input voltage × input current) with the AC output power (output voltage × load current) lets you verify the 91% conversion efficiency.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
