Adafruit
Adafruit 11025A1 2 in 1 accessory 110x110x25mm AC 220-240V 0.09A 50/60Hz 2-wire silent cooling fan
A 110 mm silent AC fan cools cabinets and cases with 220–240 V, 0.09 A, 50/60 Hz power and a standard 110×110×25 mm footprint
- Silent operation with five-blade design for low noise
- Direct 220-240 V AC power, no adapter needed
- Compact 110×110×25 mm footprint fits tight cabinets
- Standard 11025 mounting holes simplify replacement
- Two-wire connection enables quick, tool-free installation
Cabinet Cooling Fan
This 110x110x25mm AC fan operates at 220-240V with a 0.09A draw and 50/60Hz frequency. It is designed for cabinet, computer case, and industrial equipment cooling. The five-blade, two-wire construction targets silent operation and long service life in harsh conditions.
AC 220-240V 0.09A Power Requirement
The fan only works on mains voltage between 220 and 240 volts at 50 or 60 hertz. It draws 0.09 amps and uses a simple two-wire connection. Supplying a different voltage or a three-wire header will prevent operation.
Direct Replacement Installation
Standard 110x110x25mm dimensions and two-wire leads allow direct swap of an old 11025 fan without adapters. Ensure the mounting holes align and the power cable reaches the supply. Incorrect polarity on the two wires will stop the fan from spinning.
Highlights
- Silent operation with five-blade design for low noise
- Direct 220-240 V AC power, no adapter needed
- Compact 110×110×25 mm footprint fits tight cabinets
- Standard 11025 mounting holes simplify replacement
- Two-wire connection enables quick, tool-free installation
Specifications
No published specifications for this item yet.
Questions about this item
What does the 0.09 A rating mean once the fan is installed in a cabinet?
It draws 0.09 A at 220–240 V AC, so the fan adds roughly 20 W to the enclosure's power budget.
How does the 50/60 Hz AC supply affect the fan's speed in practice?
The motor runs directly on mains frequency; at 50 Hz it spins at its rated speed, and at 60 Hz it runs slightly faster.
What clearance is needed to mount the 110 × 110 × 25 mm frame?
A square cut-out of 110 mm by 110 mm and at least 25 mm depth behind the panel.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
