Acuity Brands
Acuity Brands PS1055CP FMC M10 relay
LED emergency driver providing 90 minutes of backup illumination for one or two 10 or 15 watt bulbs at 120 to 277 volts AC
- Supports one or two LED bulbs up to 15 W each
- Operates on 120 to 277 V AC input voltage
- Provides 90 minutes of emergency illumination
- Low-profile steel housing fits tight spaces
- CA Title 20 compliant for regulated markets
Emergency LED driver for commercial lighting
The Acuity Brands PS1055CP FMC M10 is a Power Sentry LED emergency driver designed for commercial fixtures. It supports one or two LED bulbs rated at 10 W or 15 W each with a maximum of 15 W per bulb. The unit provides 90 minutes of emergency illumination and is CA Title 20 compliant for regulated installations.
Compact low-profile design with standard wiring
The low-profile steel housing measures 10 1/2 in long, 2 3/8 in wide and 1 3/16 in high, allowing it to fit inside many existing fixture cavities. Installation follows standard AC wiring practices for 120 to 277 V input. A common issue is insufficient space inside the fixture for the driver and its wiring connections.
Verify fixture compatibility and bulb wattage
Confirm the fixture can physically accommodate the driver dimensions and that the LED bulbs do not exceed 15 W each. The driver operates on 120 to 277 V AC input only. It is not suitable for fixtures requiring longer than 90 minutes of emergency runtime or for bulb configurations outside the supported one or two bulb arrangement.
Highlights
- Supports one or two LED bulbs up to 15 W each
- Operates on 120 to 277 V AC input voltage
- Provides 90 minutes of emergency illumination
- Low-profile steel housing fits tight spaces
- CA Title 20 compliant for regulated markets
Specifications
| Brand | ACUITY BRANDS |
|---|
Questions about this item
How can I confirm the Acuity Brands PS1055CP FMC M10 relay is providing 90 minutes of emergency illumination after installation?
After setup, interrupt AC power to the unit; the connected LED load should remain lit. A full 90-minute discharge test verifies the rated emergency duration.
What components are included with the PS1055CP FMC M10 and what must be purchased separately?
The driver unit is supplied. You must separately provide one or two compatible LED bulbs rated at 10 W or 15 W, plus 120-277 V AC wiring and a mounting enclosure.
Which bulb wattage should I select for the PS1055CP FMC M10 — 10 W or 15 W?
The driver supports either 10 W or 15 W LED bulbs, up to a maximum of 15 W per bulb. Choose 15 W bulbs for higher lumen output or 10 W bulbs for longer battery margin.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
