Action
Action EZTOTE Hand Operated Drum Pump 3 gpm 53-1/2" H equipment
Hand-operated piston drum pump moves three gallons per minute with 15-ounce strokes
- Hand-operated piston action delivers 3 gallons per minute
- 15 ounces displaced with every full stroke
- Handles fluids up to 8,800 centipoise viscosity
- 47-inch suction tube reaches deep into standard drums
- Polyethylene and polypropylene construction resists chemical attack
Action EZTOTE Drum Pump
The Action EZTOTE is a hand-operated piston pump built for transferring fluids from standard drums. It delivers a flow rate of 3 gallons per minute with each stroke moving 15 ounces of liquid. Wetted components use polyethylene and polypropylene for broad chemical compatibility. The unit stands 53-1/2 inches high with a 47-inch suction tube.
Suits low-viscosity drum transfer.
This pump fits operators who need portable, power-free dispensing from drums at up to 20 psi and 8,800 centipoise viscosity. It works with 1-31/32 inch inlet and 7/8 inch outlet fittings. Buyers who need higher pressure output or automated continuous flow should look at something else.
Steady manual delivery under sustained use
The piston design maintains consistent output during extended hand operation without motor heat concerns. Polyethylene seals and polypropylene internals resist wear from repeated strokes at the rated viscosity limit. The 6-1/4 inch discharge tube directs flow at the 3 gpm rate as long as the operator maintains stroke rhythm.
Highlights
- Hand-operated piston action delivers 3 gallons per minute
- 15 ounces displaced with every full stroke
- Handles fluids up to 8,800 centipoise viscosity
- 47-inch suction tube reaches deep into standard drums
- Polyethylene and polypropylene construction resists chemical attack
Specifications
| Brand | ACTION PUMP |
|---|
Questions about this item
What drum opening size does the 1-31/32 inch inlet of this Action EZTOTE pump fit?
The 1-31/32 inch inlet fits standard 2 inch drum bungs; no adapter is required for typical steel or plastic drums.
Will the polyethylene and polypropylene wetted parts handle the same fluids as my older metal pump?
Polyethylene and polypropylene resist many acids, alkalis and solvents that corrode metal, but they are not suitable for strong oxidisers or some aromatic hydrocarbons.
How can I verify the pump delivers its rated 3 gpm after installation?
Count 15 oz per stroke; a steady rhythm of about 13 strokes per minute will deliver the rated 3 gpm output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



