Acoustic Audio
Acoustic Audio 251B Indoor Outdoor 3 Way 800W Black 2 Pair home audio speaker
Four passive indoor/outdoor speakers with 3-way drivers, weatherproof cabinets and mounting brackets for 20–300 W amplifiers
- TypeIndoor/Outdoor Speakers
- Weather-resistant cabinets withstand rain, snow, sun and ice
- 3-way drivers deliver full-range sound from 37 Hz to 20 kHz
- 99 dB sensitivity produces big volume from just 20 watts per channel
- Included U-brackets and hardware make mounting quick and secure
- Four passive speakers in two pairs cover patios, decks or whole-house audio
Indoor/Outdoor Passive Speakers
The Acoustic Audio 251B set delivers four passive speakers built for indoor and outdoor use. Each cabinet houses a three-way driver array with a four-inch woofer, two-inch midrange and half-inch tweeter. They suit home theatre surrounds, whole-house audio or patio installations where weather resistance matters.
Amplifier And Wiring Check
Your amplifier or receiver must supply between 20 and 300 watts per channel into raw speaker wire outputs. The speakers present an eight-ohm load and require CL3-rated or standard raw speaker cable for the runs. Verify that your amp can drive this impedance and power range before connecting the pair.
Weatherproof Cabinets And Mounting
Black ABS sealed enclosures resist rain, snow, sun and ice for year-round outdoor placement. Spring-loaded raw wire terminals accept bare conductor ends without tools. Included U-brackets with hardware allow wall or ceiling mounting at the supplied dimensions of 7.375 by 4.625 by 4.125 inches each.
Highlights
- Weather-resistant cabinets withstand rain, snow, sun and ice
- 3-way drivers deliver full-range sound from 37 Hz to 20 kHz
- 99 dB sensitivity produces big volume from just 20 watts per channel
- Included U-brackets and hardware make mounting quick and secure
- Four passive speakers in two pairs cover patios, decks or whole-house audio
Specifications
| Brand | Acoustic Audio by Goldwood |
|---|---|
| Type | Indoor/Outdoor Speakers |
Questions about this item
What comes in the 251B-2Pr pack and what else do I need to buy?
The pack contains four passive speakers, mounting brackets with hardware, and an instruction manual. You must supply an amplifier or receiver with raw speaker wire outputs and CL3 or raw speaker wire to connect them.
How do I choose between the 800-watt label and the 20-to-300-watt per channel requirement?
The 800-watt figure is the system peak rating for all four speakers combined. Each speaker needs an amplifier delivering between 20 and 300 watts per channel at 8 ohms, so select an amp that falls in that range.
What does the 99 dB at 8 ohms sensitivity mean for real-world volume?
At 99 dB sensitivity, each speaker produces loud output with modest amplifier power, so a typical home receiver can drive them to high listening levels without strain.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



