Acer America
Acer America X1111A projector lamp 180W P-VIP EC.JCQ00.001
A ready-to-install 180 W P-VIP lamp module rated for 4 000 hours normal or 5 000 hours economy use
- TypeProjector Lamp
- Wattage180W
- Lamp Life4,000 (Normal) - 5,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- 180 W P-VIP bulb delivers bright projection
- 4000 hours normal mode extends replacement interval
- 5000 hours economy mode lowers running cost
- Manufactured to ISO 9001 quality standards
Replacement lamp for Acer X1111A
The module fits the Acer X1111A projector and arrives as a fully assembled 180W P-VIP bulb inside its housing, so no separate alignment or tools are required. It restores brightness for classrooms, meeting rooms or home cinema setups that use this specific model.
Lamp life and power draw
At 180W the lamp runs for roughly 4000 hours in normal mode and up to 5000 hours when the projector is set to economy mode. Lower brightness in economy reduces heat output and fan noise, extending the interval between replacements.
Quality-assured OEM component
Each unit is built to ISO9001 standards and tested for beam performance, ignition voltage, connections and run-time before shipping. The housing matches the original mechanical interface, so installation is a direct swap without firmware updates or extra cables.
Highlights
- Ready to install with pre-assembled housing
- 180 W P-VIP bulb delivers bright projection
- 4000 hours normal mode extends replacement interval
- 5000 hours economy mode lowers running cost
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | Acer |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 4,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
How do I install the Acer X1111A lamp module in my projector, and what step is often missed?
Power off and unplug the projector, let it cool completely, then remove the lamp cover screws. Slide out the old module, insert the new EC.JCQ00.001 housing until it clicks firmly into the connector, replace the cover, and reset the lamp timer in the menu — skipping the timer reset is the step most people forget.
What maintenance or replacement will the 180W P-VIP lamp need later?
The lamp itself is the only replaceable part. After roughly 4000 hours in Normal mode or 5000 hours in Economy mode, brightness drops and the projector will prompt for a new lamp module; no separate filter or bulb-only change is required for this assembly.
What limit appears first during long sessions with the 180W P-VIP lamp?
Sustained use raises internal temperature until the projector’s thermal protection triggers and shuts the unit down; letting the cooling fan run through its full cycle after each session delays this limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


