Acer America
Acer America BenQ 5J.J9M05.001 P-VIP 240W projector lamp
Genuine replacement projector lamp with a 240W P-VIP bulb rated for 3000 hours normal or 5000 hours economy use
- TypeP-VIP
- Wattage240W
- Lamp Life3,000 Hrs. (Normal) - 5,000 Hrs. (Economy)
- Genuine BenQ replacement module with pre-assembled housing for quick installation
- P-VIP 240W bulb delivers rated brightness for compatible projectors
- Up to 3000 hours normal use or 5000 hours economy mode
- Manufactured to ISO 9001 quality standards for reliable performance
- New condition lamp ready for immediate use in your projector
BenQ 5J.J9M05.001 replacement lamp
The BenQ 5J.J9M05.001 is a new projector lamp module supplied with a P-VIP 240W bulb pre-fitted in its housing. It is intended for owners of compatible BenQ projectors who need a direct replacement when the original lamp reaches end of life.
Build and installation
The module arrives fully assembled, so no separate bulb handling or alignment is required during installation. A P-VIP 240W lamp operates at high temperature; allow the projector to cool completely before opening the lamp door and wear gloves to avoid contaminating the quartz envelope.
Compatibility check
Verify that your BenQ projector lists the 5J.J9M05.001 part number in its service manual before ordering. The lamp is rated for 3000 hours in normal mode and 5000 hours in economy mode, so confirm which mode matches your typical usage pattern.
Highlights
- Genuine BenQ replacement module with pre-assembled housing for quick installation
- P-VIP 240W bulb delivers rated brightness for compatible projectors
- Up to 3000 hours normal use or 5000 hours economy mode
- Manufactured to ISO 9001 quality standards for reliable performance
- New condition lamp ready for immediate use in your projector
Specifications
| Brand | BenQ |
|---|---|
| Type | P-VIP |
| Wattage | 240W |
| Lamp Life | 3,000 Hrs. (Normal) - 5,000 Hrs. (Economy) |
Questions about this item
Does the P-VIP 240W lamp module use a standard projector-lamp connector?
The lamp ships as a complete bulb-and-housing assembly that plugs directly into the BenQ projector socket, so no separate connector or wiring is required.
Will this 5J.J9M05.001 module fit my projector’s lamp compartment without modification?
It is built to the exact dimensions of the original BenQ housing, so it slides into the lamp cage and locks with the existing screws.
What is the correct order of steps when installing the new lamp, and where do people slip up?
Power off and unplug the projector, let it cool, remove the lamp cover, swap the module, replace the cover, then reset the lamp-hour counter in the menu — skipping the reset is the common mistake.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


