ABL
ABL L-Shape Camera Mounting Bracket Surveillance Accessory
An L-shaped aluminium bracket mounts a CCTV camera with 360° swivel and 210° tilt while supporting up to 8.8 lbs
- TypeMounting
- L-shaped design positions CCTV cameras at optimal viewing angles
- Heavy-duty aluminum construction supports cameras up to 8.8 lbs
- 360° swivel rotation enables full horizontal coverage
- 210° tilt range provides extensive vertical adjustment
- 5-inch vertical shaft offers elevated mounting height
L-Shape Bracket for CCTV Cameras
This L-shaped mounting bracket is designed for CCTV cameras and provides an economical and reliable attachment point. It suits installers who need a single, sturdy arm for indoor or outdoor positioning. It is not suited for setups requiring multiple cameras on one bracket or integrated cable management channels.
8.8 lb Load Capacity with 360° Swivel
The aluminium construction supports cameras up to 8.8 lbs while allowing a full 360° swivel and 210° tilt range. That headroom covers most standard bullet and dome units. Heavier PTZ housings or multi-sensor arrays exceed the rated limit and will need a stronger mount.
Heavy-Duty Aluminium with 9.5" Vertical Reach
Heavy-duty aluminium keeps the bracket light yet rigid, resisting corrosion on exterior walls. The 9.5" vertical shaft and 8" horizontal arm give clearance for eaves and overhangs. The fixed L-profile means the offset cannot be adjusted after installation, so the mounting point must be planned precisely.
Highlights
- L-shaped design positions CCTV cameras at optimal viewing angles
- Heavy-duty aluminum construction supports cameras up to 8.8 lbs
- 360° swivel rotation enables full horizontal coverage
- 210° tilt range provides extensive vertical adjustment
- 5-inch vertical shaft offers elevated mounting height
Specifications
| Type | Mounting |
|---|
Questions about this item
Will this L-shaped bracket hold my existing dome camera that weighs about 8 lb?
The bracket is rated for loads up to 8.8 lbs, so an 8 lb dome camera is within its capacity.
How can I verify the swivel and tilt ranges are working correctly after mounting?
Rotate the horizontal arm through a full 360° circle and tilt the camera from straight down through horizontal to 90° above horizontal; movement should be smooth at every position.
Does the package include mounting bolts for a brick wall or do I need to buy them separately?
The box contains the aluminum L-shaped bracket only; anchors, screws and any pole clamps must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



