ABL Corp
ABL Corp 2MP 1080P HD-CVI IR Bullet Camera 8mm IP66
A 2-megapixel HD-CVI bullet camera with an 8mm lens captures 1920x1080 video at 50fps and withstands outdoor conditions with an IP66 rating
- TypeSecurity & Motion
- Full HD 1080p resolution delivers sharp 1920x1080 video detail
- HD-CVI technology enables real-time long-distance transmission with no delay
- 8mm fixed lens provides a focused field of view for targeted monitoring
- IP66 weatherproof housing withstands outdoor conditions from -20°C to 50°C
- Infrared LEDs capture clear footage in 0 lux total darkness
2MP HD-CVI IR Bullet Camera
The ABL Corp camera delivers 1920x1080 resolution over HD-CVI using a 1/3" CMOS sensor. It captures real-time video at 50fps with a fixed 8mm lens. The unit is built for outdoor surveillance in home safety applications.
IP66 Weatherproof BNC Output
An IP66 rating protects the housing against dust and heavy water jets across a -20 to 50 Celsius working range. Video leaves the camera through a single BNC connector for coaxial cabling. Infrared LEDs activate automatically at 0 lux to maintain vision in darkness.
DC12V Power and NTSC Timing
The camera requires a DC12V supply with a 10 percent tolerance, so verify your power source matches this specification. Signal timing follows the NTSC standard at 60Hz frame cadence. Ensure your recorder or DVR accepts HD-CVI input on BNC before ordering.
Highlights
- Full HD 1080p resolution delivers sharp 1920x1080 video detail
- HD-CVI technology enables real-time long-distance transmission with no delay
- 8mm fixed lens provides a focused field of view for targeted monitoring
- IP66 weatherproof housing withstands outdoor conditions from -20°C to 50°C
- Infrared LEDs capture clear footage in 0 lux total darkness
Specifications
| Type | Security & Motion |
|---|
Questions about this item
Does the HD-CVI video output carry 1080P at 50fps over a single BNC cable?
Yes, the camera outputs 1920x1080 resolution at 50fps over HD-CVI via one BNC connector for real-time video.
What size mounting hole pattern does the IP66 bullet housing use?
The bullet camera body is designed for wall or ceiling mounting with a standard bracket; four screws secure the base to the surface.
How do I power the camera and what wiring mistake causes no image?
Supply 12V DC (±10%) to the power pigtail; reversing polarity or using an unregulated adapter that drifts outside tolerance will prevent start-up.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



