ABL Corp
ABL Corp 2 MP 1080P AHD IR Bullet Security Camera 3.6mm IP66
Records 1080p AHD video through a 3.6 mm lens with IP66 weatherproofing and IR night vision
- TypeSecurity & Motion
- 1080p AHD resolution delivers clear 1920x1080 video
- 6 mm lens provides a fixed wide-angle view
- IP66 rating protects against dust and heavy water jets
- Infrared LEDs enable 0 lux night vision when active
- DC 12 V power supply simplifies low-voltage installation
2 MP AHD Bullet Camera
The ABL Corp 2 MP 1080P AHD IR Bullet Security Camera delivers 1920x1080 resolution over a single coaxial BNC connection using AHD technology. It captures real-time video at 50fps with a 3.6mm fixed lens suited for wide-area coverage. The IP66-rated housing withstands rain and dust for reliable outdoor mounting.
Upgrade from Analogue CVBS
This camera replaces standard-definition analogue cameras that output composite video over the same BNC wiring. The jump is worth it when you need 1080P clarity and 50fps motion detail without pulling new network cable or re-configuring an IP infrastructure. Existing DVRs that accept AHD input can record the higher-resolution stream immediately.
Check DVR Compatibility and Power
Verify that your recorder supports AHD signal input on its BNC channels before ordering. The unit requires a stable DC12V supply within ±10% tolerance, so confirm your power distribution can deliver that voltage at the camera location. Operating temperatures from -20 to 50 Celsius and humidity up to 90% should also match the installation environment.
Highlights
- 1080p AHD resolution delivers clear 1920x1080 video
- 6 mm lens provides a fixed wide-angle view
- IP66 rating protects against dust and heavy water jets
- Infrared LEDs enable 0 lux night vision when active
- DC 12 V power supply simplifies low-voltage installation
Specifications
| Type | Security & Motion |
|---|
Questions about this item
What bracket or surface does the IP66 bullet camera mount to?
The camera uses a standard bullet-style base that screws onto walls, ceilings or poles; the IP66 housing is sealed for outdoor exposure.
How do I connect the BNC video output and DC12V power without losing the weather seal?
Run the BNC cable and 12 V DC supply through the cable gland on the pigtail; tighten the gland after wiring to keep the IP66 rating intact.
When will the IR LEDs or the 1/3" CMOS sensor need replacement?
The IR LEDs are rated for long-life operation; the CMOS sensor has no user-replaceable parts, so the unit is typically swapped only if the housing or electronics fail.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



