ABL Corp
ABL Corp 1080P AHD IR Dome Camera 3.6mm White
A 2-megapixel AHD dome camera with a 3.6mm lens, IP66 weather-proofing and IR night vision for 1080p surveillance
- TypeSecurity & Motion
- Sharp 1080P AHD video at 50fps
- Transmits over long distance with no delay
- Wide 3.6mm lens covers broad area
- IP66 waterproof rating withstands harsh weather
- Works in total darkness with IR LEDs
Ideal surveillance fit
This 2 megapixel AHD dome camera delivers 1920x1080 resolution over a single BNC connection. It suits installers who need a straightforward analogue high-definition device for recording systems that accept AHD signals. The 3.6mm lens provides a fixed viewing angle for general monitoring.
Simple cabling requirements
The unit runs on DC12V with a ten percent tolerance, so it needs a compatible power supply but no separate data wiring beyond the coaxial video line. IP66 rating allows outdoor mounting without extra weather shielding. Automatic ICR switching handles day and night transitions without user intervention.
Reliable thermal performance
Operating range spans -20 to 50 degrees Celsius with humidity up to 90 percent, so the camera tolerates wide temperature swings. Infrared LEDs activate at 0 lux for low-light scenes while the sensor maintains a signal-to-noise ratio above 52dB. Power draw stays modest on a standard 12 volt rail.
Highlights
- Sharp 1080P AHD video at 50fps
- Transmits over long distance with no delay
- Wide 3.6mm lens covers broad area
- IP66 waterproof rating withstands harsh weather
- Works in total darkness with IR LEDs
Specifications
| Type | Security & Motion |
|---|
Questions about this item
How far can the 3.6 mm lens see clearly in total darkness with the IR LEDs on?
The camera reaches 0 lux minimum illumination with the IR LEDs active, providing night vision coverage suited to the 3.6 mm fixed focal length.
What is the power draw on a 12 V DC supply when the IR LEDs and heater run continuously?
The unit operates on DC12 V (±10 %) and the built-in IR LEDs activate automatically in low light, drawing additional current only when the illumination sensor triggers them.
Which recorder or monitor input is required to display the 1080P AHD video stream?
A single BNC connector carries the AHD signal, so the recorder or monitor must accept an analog high-definition AHD input over coaxial cable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



