We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear braided PVC tubing in a dispenser box

ABBOTT

ABBOTT Clear T12 Braided PVC Tubing 5/8 x 3/8 In 100 Ft equipment

SKU CH-77QT-TQ0PN

Clear braided PVC tubing handles liquids, chemicals and gases at 75 to 250 psi and -50 F to 150 F in a 100 ft dispenser box

  • MaterialPVC
  • Weight12
  • FDA-grade material suits food and beverage lines
  • Braided reinforcement handles 75 to 250 psi working pressure
  • Clear PVC shows flow and blockages instantly
  • Operates from -50 F to 150 F across seasons
  • 100 ft dispenser box simplifies on-site cutting

Braided PVC Tubing for Fluid Transfer

This clear T12 tubing is reinforced with a braided vinyl layer and made from FDA grade PVC. It handles liquids, chemicals, gases, pneumatic lines and vacuum applications. The 100 foot length comes in a dispenser box for convenient dispensing and storage. It is sold by the foot and supplied new in bulk packaging.

Verify Fitting Compatibility and Pressure Needs

Check that your hose barb fittings match the 5/8 inch outside diameter and 3/8 inch inside diameter before ordering. Ensure your system operating pressure stays within the 75 to 250 psi rating for safe use. Confirm the temperature range of -50 F to 150 F covers your application environment. The product weighs 12 units as shipped.

Integrates with Barb Fittings and Clamps

This tubing connects directly to hose barb fittings and secures with standard clamps for leak resistant seals. The clear construction allows visual monitoring of flow and blockage without disassembly. Braided reinforcement resists kinking and collapse under vacuum or pressure cycles. It frees up installation time by dispensing straight from the box without tangling.

Highlights

  • FDA-grade material suits food and beverage lines
  • Braided reinforcement handles 75 to 250 psi working pressure
  • Clear PVC shows flow and blockages instantly
  • Operates from -50 F to 150 F across seasons
  • 100 ft dispenser box simplifies on-site cutting

Specifications

MaterialPVC
Weight12
BrandAbbott Rubber Co Inc

Questions about this item

Does the dispenser box contain fittings or clamps, or must they be purchased separately?

The box supplies 100 ft of clear braided PVC tubing only; hose barb fittings and clamps are not included and must be bought separately.

The spec lists a pressure range of 75 to 250 psi — which figure applies to my setup?

The 75 to 250 psi rating varies with temperature; at lower temperatures the tubing withstands up to 250 psi, while at the maximum 150 F it is rated for 75 psi.

What does the 150 F temperature limit mean for continuous hot-water use?

The tubing is rated from -50 F to 150 F; at 150 F the pressure capacity drops to 75 psi, so continuous hot-water lines must stay within that reduced pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.