Abanaki
Abanaki Economixer 200 Coolant Mixer 15 to 45 Ratio 55 gal
A coolant proportioning mixer with a 15 to 45 ratio and 55 gallon tank capacity
- TypeTarps
- Coolant mixing ratios adjustable from 15 to 45 to 1
- Handles tank capacities from 15 to 55 gallons
- Four-foot discharge tube reaches distant fill points
- Economixer 200 delivers precise coolant proportioning
- Ready for immediate use in automotive maintenance
Abanaki Economixer 200 Coolant Mixer
The Abanaki Economixer 200 is a coolant proportioning mixer designed for workshop and industrial maintenance teams. It automates the blending of concentrate and water so operators can fill machine tool sumps or central systems without manual measuring. The unit suits facilities that mix coolant on demand rather than batch-preparing large volumes.
Mix ratio range 15 to 1 through 45 to 1
The mixer delivers adjustable dilution from 15:1 up to 45:1, covering the typical range for soluble oils, semi-synthetics and synthetic coolants. It handles tank capacities from 15 gallons to 55 gallons, making it practical for individual machine fills or multiple sump top-offs. Very small reservoirs below 15 gallons or large central systems above 55 gallons fall outside the intended capacity window.
Four foot discharge tube and direct mount
A 4 ft discharge tube lets the operator reach sump openings without moving the mixer across the shop floor. The compact body mounts directly on a drum or tote, so the unit stays stable during filling and stores neatly when not in use. No separate pump or plumbing kit is required, keeping daily setup to a simple connect-and-run routine.
Highlights
- Coolant mixing ratios adjustable from 15 to 45 to 1
- Handles tank capacities from 15 to 55 gallons
- Four-foot discharge tube reaches distant fill points
- Economixer 200 delivers precise coolant proportioning
- Ready for immediate use in automotive maintenance
Specifications
| Brand | Abanaki |
|---|---|
| Type | Tarps |
Questions about this item
Will the Economixer 200 connect to the 4 ft discharge tube on my existing 55 gal tank?
The unit includes a 4 ft discharge tube and supports tank capacities from 15 to 55 gal, so it fits the tank you already have.
How can I verify the Economixer 200 is delivering a 15 to 1 ratio after installation?
The mixer adjusts from 15 to 1 up to 45 to 1; set the dial to the 15 to 1 mark and confirm the output matches that proportion.
Does the box contain the discharge tube or must I buy it separately?
The 4 ft discharge tube is included with the Economixer 200; no separate purchase is required for that component.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
