We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular green silicone thermal pad 100 by 50 millimetres with protective films on both sides

Aairhut Thermal Pad-20-100x2 20W/m.K 100x50mm Silicone Thermal Pad

SKU CH-8V6J-EYSJR

High-conductivity 20W/m.K silicone pad measuring 100x50mm with ultra-soft 30-55 Shore C hardness for CPUs, GPUs, SSDs and consoles

  • Accessory Type43201619
  • Maximum support size7"
  • Dimension0.3 cm x 9 cm x 18 cm
  • Fan SizeX2
  • SpecificationsSilicone, Thermal, 45 grams, 0.3 L x 9 W x 18 H centimeters,
  • Sports Team1 Piece
  • Rapid heat transfer with true 20W/m.K thermal conductivity
  • Large 100 x 50mm coverage exceeds standard 85 x 45mm pads
  • Non-conductive, non-toxic, fire-retardant material safe for all components
  • Ultra-soft 30-55 Shore C hardness fills microscopic gaps for better contact
  • Dual protective films allow easy handling and clean installation

High-conductivity thermal pad

Aairhut Thermal Pad-20-100x2 is a silicone thermal interface material rated at 20W/m.K for rapid heat transfer. It measures 100mm x 50mm with a 2mm thickness and includes dual protective films. The ultra-soft composition fills microscopic gaps on components such as SSDs, RAM, VRAM and VRM. It is non-conductive, non-toxic and fire retardant.

Suited for high-performance upgrades

This pad suits builders upgrading PS4, PS5, laptop or desktop components where a 2mm gap exists and maximum conductivity is required. The large 100 x 50mm sheet can be trimmed with scissors to fit smaller dies. Buyers needing a thinner profile for MacBook applications or different gap sizes should select the 0.5mm, 1.0mm or 1.5mm variants instead.

Sustained load behaviour

Under continuous heavy loads the 20W/m.K conductivity maintains lower component temperatures by transferring heat efficiently into heatsinks. The soft 30-55 Shore C hardness conforms permanently to uneven surfaces without pumping out. Density of 3.5 g/cc and breakdown voltage of 9.8KV ensure stable long-term insulation and thermal performance.

Highlights

  • Rapid heat transfer with true 20W/m.K thermal conductivity
  • Large 100 x 50mm coverage exceeds standard 85 x 45mm pads
  • Non-conductive, non-toxic, fire-retardant material safe for all components
  • Ultra-soft 30-55 Shore C hardness fills microscopic gaps for better contact
  • Dual protective films allow easy handling and clean installation

Specifications

BrandAairhut
ModelThermal Pad-20-100x2
Part NumberThermal Pad-20-100x2
Accessory Type43201619
Maximum support size7"
Dimension0.3 cm x 9 cm x 18 cm
Fan SizeX2
SpecificationsSilicone, Thermal, 45 grams, 0.3 L x 9 W x 18 H centimeters, Thermal Pad-20-100x2, Aairhut
Sports Team1 Piece
FeaturesThermal
Package Contents1, false

Questions about this item

Does the 20W/m.K thermal pad need any extra thermal paste or adhesive to stay in place on my SSD?

No — each side already carries a self-adhesive protective film; just peel, position and press.

Will a 100 x 50mm pad cover the VRAM chips on my older graphics card that used 85 x 45mm pads?

Yes, the larger footprint gives more coverage; trim with scissors if any overhang remains.

After fitting the pad how can I confirm it is conducting heat properly?

Monitor component temperatures under load — they should drop noticeably compared with the stock pad or bare heatsink.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.