We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four grey silicone thermal pads 100 by 100 millimetres in thicknesses 0.5 1 1.5 and 2 millimetres

Aairhut Aairhut004 4-Pack 13 W/m.K Thermal Pads 100x100mm 0.5/1/1.5/2mm

SKU CH-916B-PQMYJ

Four 100×100 mm silicone sheets at 13 W/m·K in 0.5, 1, 1.5 and 2 mm thicknesses for GPU VRAM, SSD and console cooling

  • ColorGray
  • Dimension1.0922 cm x 10.3886 cm x 10.795 cm
  • Fan Numbers1
  • Fan Size10 cm x 10 cm x 0.5 cm
  • SpecificationsSilicone, 170 grams, 0.181 kilograms, 1.0922 L x 10.3886 W x
  • FeaturesThermal pads, Silicone
  • Four 100x100mm sheets in 0.5, 1, 1.5 and 2mm cover every gap
  • 13 W/m.K conductivity pulls heat from VRAM and SSD controllers
  • Soft pads compress 30 to 40 percent for full contact on uneven surfaces
  • Non-conductive 9.8KV/mm insulation prevents shorts and absorbs shock
  • Rated from minus 40°C to 200°C for demanding gaming and mining loads

Four Thicknesses in One Kit

This 4-pack supplies four 100x100mm silicone sheets in 0.5mm, 1mm, 1.5mm and 2mm thicknesses. The range covers typical gaps on GPU VRAM, M.2 SSDs, PS4, PS5 and laptop components. Each pad is rated at 13 W/m.K thermal conductivity and is non-conductive with a 9.8 KV/mm dielectric strength.

Cut to Size, Peel and Stick

The pads are soft enough to trim with scissors and carry dual self-adhesive films for placement. A 30-40% compression rate lets them conform to uneven surfaces without the mess of thermal paste. No special tools are required; simply remove the protective film and press into position.

Stable Up to 200 °C

The silicone material operates from -40 °C to 200 °C and is flame-retardant and RoHS certified. Under sustained load the pads maintain consistent contact and do not pump out or dry like grease, so thermal resistance remains steady during long gaming or compute sessions.

Highlights

  • Four 100x100mm sheets in 0.5, 1, 1.5 and 2mm cover every gap
  • 13 W/m.K conductivity pulls heat from VRAM and SSD controllers
  • Soft pads compress 30 to 40 percent for full contact on uneven surfaces
  • Non-conductive 9.8KV/mm insulation prevents shorts and absorbs shock
  • Rated from minus 40°C to 200°C for demanding gaming and mining loads

Specifications

BrandAairhut
ModelAairhut004
Part NumberAairhut004
ColorGray
Dimension1.0922 cm x 10.3886 cm x 10.795 cm
Fan Numbers1
Fan Size10 cm x 10 cm x 0.5 cm
SpecificationsSilicone, 170 grams, 0.181 kilograms, 1.0922 L x 10.3886 W x 10.795 H centimeters, Thermal pads, Aairhut004, 1, Aairhut
FeaturesThermal pads, Silicone
Package ContentsThermal pads

Questions about this item

How do I confirm the 13 W/m.K thermal pads are transferring heat correctly after I install them on my GPU VRAM?

Monitor component temperatures under load; the pads are rated to cut VRAM and GPU core temps, preventing throttling on cards such as RTX 4080 and 5090.

The kit lists four sheets at 0.5 mm, 1 mm, 1.5 mm and 2 mm — what else is included and what must I supply?

The pack contains only the four 100 × 100 mm silicone pads with dual self-adhesive films; no tools, cleaning wipes or additional thermal material are supplied.

Which of the four thicknesses — 0.5 mm, 1 mm, 1.5 mm or 2 mm — should I choose for an M.2 SSD versus a graphics card VRAM?

Measure the gap between the component and the heatsink; pick the thinnest pad that fills it completely, using the 30–40 % compression range to ensure full contact without excess pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.