We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver anodized aluminum T-shaped joining plate with twelve mounting holes

80/20

80/20 4125 12 Hole Tee Joining Plate

SKU CH-0TXP-ZFYSZ

Anodized aluminium tee joining plate with twelve mounting holes for 1020 and 2020 profile slots

  • Weight0.25
  • Strong tee joint with twelve mounting holes
  • Anodized aluminium resists corrosion in outdoor use
  • Fits 1020 and 2020 profiles for modular builds
  • Lightweight at 0.25 lb for easy handling
  • Precision inch dimensions ensure accurate alignment

12-Hole Tee Joining Plate for 10 Series

The 80/20 4125 flat plate connects aluminium profiles at a tee junction using twelve mounting holes. It is machined for the 10 Series system with a 17/64 in slot width. The anodised silver finish resists corrosion in indoor or sheltered outdoor structures.

Anodised aluminium and hole pattern

The anodised surface protects the bracket without adding measurable thickness, so the twelve-hole pattern aligns directly with standard 10 Series slots. This allows rigid corner assemblies without drilling or tapping additional holes in the extrusions.

Verify profile series and slot width

Confirm that your framing uses the 10 Series profile and a 17/64 in slot before ordering. The plate is not compatible with other series or metric-slot extrusions, so mismatched profiles will prevent proper fastening.

Highlights

  • Strong tee joint with twelve mounting holes
  • Anodized aluminium resists corrosion in outdoor use
  • Fits 1020 and 2020 profiles for modular builds
  • Lightweight at 0.25 lb for easy handling
  • Precision inch dimensions ensure accurate alignment

Specifications

Brand80/20
Weight0.25

Questions about this item

Will the 12 mounting holes need re-tapping after repeated assembly?

The plate is anodized aluminium with 12 pre-drilled holes; re-tapping is not required for normal re-use with 10 series fasteners.

What stops the joint from shifting when the 1020 profile carries a continuous load?

The tee geometry locks into the 17/64 in slot of 1020 and 2020 profiles, resisting shear until the aluminium yields.

Does the anodized finish stay cool when the frame runs under load all day?

Aluminium conducts heat away from the joint; the thin 3/16 in plate adds negligible thermal mass and no measurable temperature rise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.