#7523 Rosin Solder Flux 2 x 40g Jar RMA
Two 40 g jars of RMA rosin flux deliver non-corrosive, no-clean performance for PCB, SMD, BGA and CPU repair from 100 °C to 400 °C
- Compatibility/Fitment2Pcs, Rosin Solder Flux
- RMA flux leaves non-corrosive residue that rarely needs cleaning
- Rosin-based formula meets J-STD-004 ROH0 classification for reliability
- High-purity rosin is lead-free, chloride-free and non-toxic
- Works across a wide 100 400 °C soldering temperature range
- Two 40 g jars supply 1.41 oz each for extended use
Product identity
#7523 Rosin Solder Flux is a rosin mildly activated (RMA) flux supplied as two 40 g jars. It is intended for technicians and hobbyists who need a reliable, non-corrosive flux for electronic soldering and repair work on SMD, BGA, LED, PCB, IC and CPU assemblies.
Build integration
The paste-like consistency lets it stay in place on fine-pitch pads and component leads during hand soldering or hot-air rework. Because residues are non-corrosive and classified ROH0 per J-STD-004 and J-STD-004B, cleaning is optional in most applications, freeing bench time and reducing solvent use.
Sustained load behaviour
The flux remains active across a soldering temperature range of 100 to 400 °C (373 to 673 °F), delivering consistent wettability, high tack force and strong joints throughout extended rework sessions. Its lead-free, chloride-free, non-toxic formulation maintains stable viscosity without breaking down or charring during prolonged heat exposure.
Highlights
- RMA flux leaves non-corrosive residue that rarely needs cleaning
- Rosin-based formula meets J-STD-004 ROH0 classification for reliability
- High-purity rosin is lead-free, chloride-free and non-toxic
- Works across a wide 100 400 °C soldering temperature range
- Two 40 g jars supply 1.41 oz each for extended use
Specifications
| Compatibility/Fitment | 2Pcs, Rosin Solder Flux |
|---|
Questions about this item
How long does a 40 g jar last under daily soldering?
Each jar holds 40 g of RMA flux; typical SMD work uses a few grams per session, so one jar covers many days of continuous use.
Does the flux smoke or smell strong when held at 400 °C all day?
The rosin-based #7523 flux is rated to 400 °C and produces only light rosin fume with moderate viscosity, so odour stays low during extended sessions.
What cleaner do I need to remove the residue after soldering?
Residues are non-corrosive ROH0 class and do not require removal in most applications; if cleaning is desired, isopropyl alcohol works.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
