We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red vinyl-insulated copper fork terminals, #10 stud, 18 AWG, 100 pieces

3M

3M MVU18-10FBX Fork Terminal #10 Stud 18 AWG 600V Vinyl 100pk

SKU CH-JND6-7371P

Red vinyl-insulated fork terminals accept 22–18 AWG wire, fit #10 studs, and are rated 600 V with CSA and UL approval

  • TypeElectrical Connectors
  • Crimp-ready copper fork terminal fits #10 studs
  • Vinyl insulation rated to 600 V and 221 °F
  • Accepts 18 AWG down to 22 AWG wire
  • UL Listed and CSA Certified for code compliance
  • 100-piece pack covers multiple wiring jobs

3M Fork Terminal #10 Stud 18 AWG

These vinyl-insulated fork terminals accept 22 to 18 AWG wire and fit a #10 stud. The copper connectors are crimp-type with a butted seam and rated for 600 V. They carry UL and CSA certifications for electrical safety. The maximum operating temperature is 221 degrees F.

Replaces damaged ring terminals or loose wire ends

Use these when a fork tongue allows faster stud removal than a closed ring. The crimp connection upgrades from simple twist-and-tape methods for a more secure joint. The jump is worth it when vibration or thermal cycling risks loosening a screw-on connector.

Crimp with a matched 18 AWG tool for a gas-tight

The butted seam requires even pressure across the barrel to avoid a weak spot. A common error is using oversized dies that leave the seam open. The 0.85 in overall length fits standard terminal blocks, but tight panels may need the fork orientation planned before crimping.

Highlights

  • Crimp-ready copper fork terminal fits #10 studs
  • Vinyl insulation rated to 600 V and 221 °F
  • Accepts 18 AWG down to 22 AWG wire
  • UL Listed and CSA Certified for code compliance
  • 100-piece pack covers multiple wiring jobs

Specifications

Brand3M
TypeElectrical Connectors

Questions about this item

Will the #10 stud fork terminal fit a standard #10 screw?

Yes, the terminal is built for a #10 stud, so it fits a standard #10 screw or bolt without modification.

What crimp tool setting should I use for the 18 AWG wire range?

Use a crimper rated for 22–18 AWG insulated terminals and apply even pressure across the butted seam; the most common mistake is crimping only the insulation sleeve instead of the metal barrel.

How often should I inspect the vinyl insulation for heat damage?

Check the red vinyl insulation periodically when the circuit runs near its 221 °F temperature rating; replace any terminal that shows cracking, discolouration or melting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.