We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow nylon-insulated fork terminals, 50 pieces, crimp style, 1/4 inch stud

3M

3M MNG10-14FLX Fork Terminal 10 AWG 1/4 in Stud 600 V Nylon Insulated 50 Pack

SKU CH-Z33N-MD33P

Yellow nylon-insulated fork terminals accept 12–10 AWG wire, fit a 1/4 in stud, and are rated 600 V at 221 °F in a 50-pack

  • TypeElectrical Connectors
  • Crimp-ready fork terminal fits 1/4 in studs
  • Yellow nylon insulation withstands 221 °F operating heat
  • UL listed and CSA certified for 600 V safety
  • Insulation grip barrel accepts 12–10 AWG wire
  • 50-piece pack supplies volume wiring jobs

10 AWG Nylon-Insulated Fork Terminals

These 3M fork terminals accept 10 to 12 AWG copper wire and fit a 1/4 inch stud. The butted-seam barrel with insulation grip provides a secure crimp connection. Yellow nylon insulation is rated for 600 V and a maximum operating temperature of 221 degrees F. The pack contains 50 UL-listed and CSA-certified terminals.

Replaces Damaged or Undersized Ring Terminals

Switch to these fork terminals when a ring terminal is hard to install on a captive stud or when an existing connector shows corrosion or heat damage. The open fork design allows placement without removing the nut completely, saving time on automotive, marine or industrial panels. The step up is worthwhile whenever vibration or thermal cycling loosens standard crimps.

Limited to Crimp Tooling and 10–12 AWG Range

These terminals require a properly sized crimp tool for the butted-seam barrel; an incorrect die will produce a weak joint. They cannot be soldered and are not suited for wire larger than 10 AWG or smaller than 12 AWG. The 1/4 inch stud size fixes the mounting hardware, so a different stud diameter demands a different terminal.

Highlights

  • Crimp-ready fork terminal fits 1/4 in studs
  • Yellow nylon insulation withstands 221 °F operating heat
  • UL listed and CSA certified for 600 V safety
  • Insulation grip barrel accepts 12–10 AWG wire
  • 50-piece pack supplies volume wiring jobs

Specifications

Brand3M
TypeElectrical Connectors

Questions about this item

What stud size and wire gauge does the MNG10-14FLX fork terminal accept?

The terminal fits a 1/4 in stud and handles 10 AWG wire, with a minimum size of 12 AWG.

Which crimp tool setting matches the barrel on these terminals?

Use a crimper rated for 10-12 AWG insulated terminals; the butted-seam barrel length is 0.55 in.

How often should the nylon-insulated crimp joints be inspected?

Check for cracked yellow insulation or loose copper barrels after thermal cycles; the nylon is rated to 221 Degrees F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.