We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue heat-shrink fork terminal 14 AWG 1/4 in stud 25 pack

3M

3M MH14-14FLX Fork Terminal 1/4 in Stud 14 AWG 600 V Heat Shrink

SKU CH-8YPP-HR0V8

Blue insulated fork terminals accept 16 to 14 AWG wire, crimp to copper connectors with heat-shrink insulation, and are rated for 600 V at 221 °F

  • TypeElectrical Connectors
  • CSA certified and UL listed for code-compliant installations
  • Heat-shrink insulation seals out moisture and vibration
  • Brazed seam resists pull-out on 14 AWG copper wire
  • Fits 1/4 in studs with 1.1 in overall length
  • Supplied in a 25-piece pack for multiple connections

Fork Terminal 14 AWG 1/4 in Stud

This 3M fork terminal accepts 14 to 16 AWG copper wire and fits a 1/4 inch stud. It is designed for automotive and industrial wiring jobs that require a secure crimp connection. The heat-shrink insulation provides environmental sealing after installation. Each pack contains 25 terminals for multiple connection points.

Crimp Installation With Heat Shrink

Strip the wire to the correct length, insert it into the barrel and crimp with a ratchet tool sized for 14 AWG. Apply heat evenly until the tubing shrinks and the adhesive flows to seal the joint. A common error is using pliers instead of a proper crimper, which can leave the connection loose. Another mistake is overheating the tubing, which can scorch the insulation.

600 V Rating And Wire Range

The terminal is rated for 600 V and handles 14 AWG down to 16 AWG stranded copper. It comfortably manages typical low-voltage automotive circuits and control wiring within this gauge range. The brazed seam adds mechanical strength under vibration. It runs out of capacity when wire exceeds 14 AWG or when the application demands a higher voltage rating.

Highlights

  • CSA certified and UL listed for code-compliant installations
  • Heat-shrink insulation seals out moisture and vibration
  • Brazed seam resists pull-out on 14 AWG copper wire
  • Fits 1/4 in studs with 1.1 in overall length
  • Supplied in a 25-piece pack for multiple connections

Specifications

Brand3M
TypeElectrical Connectors

Questions about this item

How can I confirm the heat-shrink insulation on the 1/4 in stud fork terminal has sealed correctly after crimping?

After crimping the copper connector onto 14 to 16 AWG wire, apply heat until the blue tubing shrinks tightly and adhesive flows, forming a waterproof seal around the 1.1 in barrel.

What comes in the package and what must I supply separately?

The box contains 25 blue heat-shrink fork terminals rated 600 V with brazed seams; you must provide 14 to 16 AWG wire, a crimp tool and a heat source.

Which wire gauge should I select for the 1/4 in stud fork terminal?

The terminal accepts 14 AWG maximum and 16 AWG minimum, so choose 14 AWG for the largest cross-section or 16 AWG for the smallest within the certified range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.