3M MH10-14FLX Fork Terminal 1/4 in Stud 10 AWG 600 V Heat Shrink

10 AWG Fork Terminal for 1/4 in Stud

The 3M MH10-14FLX is a heat-shrink fork terminal built for 10 AWG wire with a 1/4 inch stud size. It accepts wire sizes from 12 AWG to 10 AWG and carries a 600 V rating. The brazed seam and copper construction provide a secure crimp connection for electrical and industrial wiring tasks. Yellow insulation identifies the wire range at a glance.

Upgrade from non-sealed ring or bare crimp terminals

This terminal replaces open-barrel or vinyl-insulated connectors where moisture, vibration or corrosion risk is present. The heat-shrink insulation seals the joint when heated, adding environmental protection that standard crimp terminals lack. The jump is worth it for automotive, marine or outdoor circuits that demand a sealed, UL Listed and CSA Certified connection.

25-piece pack covers multiple 10 AWG circuit

Each pack supplies 25 terminals, enough for several branch circuits or a full panel rewire at 10 AWG. The 1.2 inch overall length fits standard terminal blocks and stud mounts. Headroom ends at the 10 AWG maximum wire size and 600 V limit; larger conductors or higher voltage systems require a different terminal specification.