We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White vinyl tape roll 1 inch wide 54 5/8 yards long 10.2 mil thick

3M

3M 9087 Double-Sided Vinyl Film Tape 1 in x 54 5/8 yd 10.2 mil White

SKU CH-15XP-PAX25

Double-sided vinyl film tape bonds surfaces with acrylic adhesive across a 0 to 158 °F range

  • ColorWhite
  • Double-sided acrylic adhesive bonds two surfaces cleanly
  • White 3M Scotch 9087 vinyl film backing resists moisture and abrasion
  • 2 mil thickness adds durability for splicing and holding tasks
  • Performs reliably from 0 °F to 158 °F in indoor and outdoor use
  • 54 5/8 yard roll supplies long continuous length for high-volume jobs

3M 9087 Double-Sided Vinyl Film Tape

This 3M Scotch 9087 bonding tape uses a white polyvinyl chloride film carrier coated with acrylic adhesive on both sides. It suits general-purpose mounting, splicing and holding tasks in offices, workshops or light industrial settings where a clean, conformable bond is needed. The roll measures one inch wide by fifty-four and five-eighths yards long.

Installation notes and common issues

Apply to clean, dry surfaces at room temperature for best initial tack; the acrylic adhesive builds full strength over twenty-four hours. The 10.2 mil thickness helps the tape bridge minor surface irregularities, but heavy textures or oily residues will reduce contact area and may cause edges to lift. Avoid stretching the film during application to prevent retraction stress.

Sustained load behaviour

Rated for continuous service from zero to one hundred fifty-eight degrees Fahrenheit, the acrylic system resists thermal softening and cold embrittlement within that window. Under constant shear the vinyl backing distributes stress evenly, limiting creep compared with thinner transfer tapes. Extended exposure above the maximum temperature or to direct solvent contact will degrade adhesive cohesion over time.

Highlights

  • Double-sided acrylic adhesive bonds two surfaces cleanly
  • White 3M Scotch 9087 vinyl film backing resists moisture and abrasion
  • 2 mil thickness adds durability for splicing and holding tasks
  • Performs reliably from 0 °F to 158 °F in indoor and outdoor use
  • 54 5/8 yard roll supplies long continuous length for high-volume jobs

Specifications

Brand3M
ColorWhite

Questions about this item

How do I verify the tape is holding at the rated 158 Degrees F maximum performance temperature?

After application, expose the bond to the intended service temperature up to 158 Degrees F; if the joined surfaces remain secure without delamination, the acrylic adhesive on the polyvinyl chloride film backing is performing within its specified range.

What exactly comes in the box and is a primer or dispenser included?

The package contains one roll of 3M 9087 double-sided vinyl film tape measuring 1 in wide by 54 5/8 yd long at 10.2 mil thickness; no primer, dispenser or additional accessories are included.

Which version of the 9087 should I choose for a permanent indoor bond on smooth surfaces?

The listed 9087 product is a single configuration — white, 1 in x 54 5/8 yd, 10.2 mil polyvinyl chloride film with acrylic adhesive — so select this roll when you need that exact width, length and thickness for permanent indoor bonding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.