We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

3M

3M 610 Anti-Slip Tape Black 6 in x 60 ft traffic safety equipment

SKU CH-PPKE-8HJ0H

Black mineral-coated anti-slip tape, 28 mil thick with coarse abrasive grade and rubber adhesive for indoor or outdoor safety walkways

  • ColorBlack
  • Coarse abrasive grit increases traction on slippery surfaces
  • 60 ft roll covers large areas with minimal seams
  • 28 mil thickness resists wear in heavy-traffic zones
  • Rubber adhesive bonds securely to indoor and outdoor substrates
  • Black mineral coating maintains visibility without fluorescent additives

3M 610 Anti-Slip Tape Dimensions

This 3M 610 anti-slip tape measures 6 inches wide by 60 feet long. It features a mineral-coated surface with a coarse abrasive grade for traction. The tape uses a rubber adhesive backing and has a thickness of 28 mil. It is designed for indoor and outdoor safety walk applications.

Suitable for General Safety Marking

This tape suits facility managers marking stairs, ramps or walkways where a black, non-fluorescent surface is required. The solid colour and lack of legend make it useful for general hazard areas. Buyers needing glow-in-the-dark properties or pre-printed warning legends should look at alternative products.

Check Surface and Environment Compatibility

Before ordering, verify that the mounting surface is clean, dry and compatible with rubber adhesive. Confirm the 28 mil thickness fits the available clearance on steps or flooring. Ensure the coarse mineral coating meets the specific friction requirements for the intended traffic type.

Highlights

  • Coarse abrasive grit increases traction on slippery surfaces
  • 60 ft roll covers large areas with minimal seams
  • 28 mil thickness resists wear in heavy-traffic zones
  • Rubber adhesive bonds securely to indoor and outdoor substrates
  • Black mineral coating maintains visibility without fluorescent additives

Specifications

ColorBlack
Brand3M

Questions about this item

What surface must be clean and dry before applying the 3M 610 tape?

The adhesive bonds best to a clean, dry substrate free of oil, dust and loose paint; degrease and let it dry fully before you unroll the 6 in by 60 ft roll.

Can the 28 mil mineral-coated tape be laid over existing non-slip paint or grating?

Yes, the rubber adhesive will stick to cured non-slip paint or metal grating if the old surface is sound, clean and dry, adding a coarse 600-grade walking layer on top.

How do I verify the 610 Safety Walk tape is holding after installation?

Press firmly along the full 60 ft length with a roller, then try to lift a corner; if it resists peeling and the black mineral grit feels firmly anchored, the bond is good.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.