We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue nylon ring terminals with 3/8 inch stud holes, pack of 200

3M

3M 6 AWG Nylon Ring Terminal 3/8" Stud Blue Pack of 200

SKU CH-VMV5-50KTZ

Nylon-insulated ring terminals for 6 AWG wire with 3/8" stud, 600 V rating, 221 °F max temperature, supplied in a 200-piece pack

  • Secure 3/8 in stud fit with 38 spec
  • Reliable crimp from brazed seam copper
  • High-temp nylon insulation rated to 221 deg F
  • UL and CSA listed for 600 V safety
  • Bulk 200 pack covers large wiring jobs

6 AWG Nylon Ring Terminals

These 3M ring terminals accept 6 AWG wire and feature a 3/8 inch stud size. The blue nylon insulation provides visual identification and is rated for up to 221 degrees Fahrenheit. Each terminal uses a brazed seam and copper construction for a secure crimp connection. The pack contains 200 pieces for high-volume wiring jobs.

3/8 Inch Stud Compatibility

The single specification that decides fit is the 3/8 inch stud size matched to a 6 AWG wire range. A terminal with a different stud diameter or wire gauge will not install correctly on the intended bolt or accept the conductor. Verify the stud measurement and wire size before crimping to ensure a reliable electrical bond.

CSA and UL Listed for 600 Volts

These terminals are certified to CSA and UL standards with a maximum voltage rating of 600 V. The crimp connection method requires an appropriate crimping tool for 6 AWG copper wire. The 1.58 inch overall length and .63 inch tongue width determine the space needed on the terminal block or bus bar. The nylon insulation eliminates the need for separate heat shrink in many environments.

Highlights

  • Secure 3/8 in stud fit with 38 spec
  • Reliable crimp from brazed seam copper
  • High-temp nylon insulation rated to 221 deg F
  • UL and CSA listed for 600 V safety
  • Bulk 200 pack covers large wiring jobs

Specifications

Brand3M

Questions about this item

What does the 600 V rating mean once the terminal is crimped in a harness?

It means the connection is listed for circuits up to 600 V; the nylon insulation and brazed seam keep the joint stable at that voltage when properly crimped.

How does the 3/8 in stud size limit the hardware I can use?

The tongue is drilled for a 3/8 in bolt, so only fasteners with that exact shank diameter will seat correctly on the 0.63 in wide tongue.

What clearance do I need for the 1.58 in overall length when routing the loom?

Allow at least 1.58 in straight from the crimp barrel to the bolt centreline so the ring sits flat without bending the wire.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.