3M
3M 5413 Amber Electrical Tape 36 yd 3/8 in
High-temperature polyimide film tape with silicone adhesive withstands -100 °F to 500 °F in a 36 yd continuous roll
- TypePackaging and Shipping Accessories
- ColorAmber
- Withstands -100 °F to 500 °F continuous heat
- 36-yard roll covers long cable runs
- 7 mil polyimide film resists abrasion
- Silicone adhesive bonds reliably at high temperature
- Amber colour aids quick circuit identification
3M 5413 Amber Electrical Tape
This 3M 5413 tape is a high-temperature polyimide film with silicone adhesive, supplied in a 36 yd continuous roll that is 3/8 in wide and 2.7 mil thick. It is built for electrical and industrial tasks that demand stable performance from -100 Degrees F up to 500 Degrees F.
When to choose this tape
The polyimide construction replaces standard vinyl tapes when the job exceeds their temperature limits or requires a thinner, more conformable layer. The jump is worth it for high-heat masking, coil insulation or any application where adhesive residue and thermal breakdown are unacceptable.
Build and workflow fit
The narrow 3/8 in width suits tight windings and small components, while the 36 yd length keeps change-overs infrequent on production lines. Single-sided silicone adhesive bonds cleanly to itself and most substrates, freeing operators from cleanup and rework caused by adhesive bleed at extreme temperatures.
Highlights
- Withstands -100 °F to 500 °F continuous heat
- 36-yard roll covers long cable runs
- 7 mil polyimide film resists abrasion
- Silicone adhesive bonds reliably at high temperature
- Amber colour aids quick circuit identification
Specifications
| Type | Packaging and Shipping Accessories |
|---|---|
| Brand | 3M |
| Color | Amber |
Questions about this item
What width and length does the 5413 roll provide for wrapping components?
The roll is 3/8 in wide and 36 yd long, giving a continuous length for multiple wraps.
How do I apply the polyimide film tape so the silicone adhesive bonds correctly?
Clean the surface, then wrap the tape with slight tension and press firmly; the silicone adhesive needs clean contact to hold at temperature extremes.
When should I replace the tape if it sees repeated heat cycles up to 500 °F?
Inspect after each high-heat cycle; replace the tape if the amber film discolours, cracks or the adhesive loses tack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
WESTERN STATES #10 Repulpable Window Envelopes White 30% Recycled Compostable Window Box 500
WESTERN STATES Door Hanger Envelope White 92% Brightness Oval Cutout 500
Econoco BH55 Double Bulletin Sign Holder 22" x 28" Chrome
- Sign Holders



