3M
3M 510 Anti-Slip Tape Black 2in x 60ft 36mil 500
Black anti-slip tape with coarse abrasive and rubber adhesive for indoor and outdoor safety, 2 in wide by 60 ft long, 36 mil thick, supplied in a 500 series roll
- Coarse 60 grit surface increases traction on slippery floors
- 36 mil thickness resists wear in high-traffic indoor and outdoor areas
- Rubber adhesive bonds firmly to clean substrates without fasteners
- 2 inch by 60 foot roll covers large zones with fewer seams
- 3M Safety Walk 500 series trusted for industrial anti-slip performance
Industrial Anti-Slip Tape
3M 510 anti-slip tape provides a coarse abrasive surface bonded to a rubber adhesive backing. The black tape measures two inches wide by sixty feet long and is thirty-six mils thick. It is rated for both indoor and outdoor environments where secure footing is required.
Sustained Load Behaviour
The rubber adhesive maintains its bond under continuous foot traffic and exposure to weather without peeling at the edges. Coarse grit particles stay embedded in the foil backing during prolonged use rather than shedding after a short break-in period. Surface traction remains consistent across the full sixty-foot roll length.
Interface Limits
Application requires a clean, dry substrate so the rubber adhesive can achieve full contact without contamination. The tape conforms to flat or slightly contoured surfaces but cannot bridge large gaps or adhere to oily, wet or heavily textured floors. Outdoor durability depends on proper surface preparation before installation.
Highlights
- Coarse 60 grit surface increases traction on slippery floors
- 36 mil thickness resists wear in high-traffic indoor and outdoor areas
- Rubber adhesive bonds firmly to clean substrates without fasteners
- 2 inch by 60 foot roll covers large zones with fewer seams
- 3M Safety Walk 500 series trusted for industrial anti-slip performance
Specifications
| Brand | 3M |
|---|
Questions about this item
How does the 36 mil thickness hold up to constant foot traffic and outdoor heat?
The 36 mil construction is built for heavy-duty indoor and outdoor use, resisting wear from daily foot traffic and temperature swings without peeling or cracking.
Does the rubber adhesive on this 3M 510 tape bond to bare concrete, or do I need a primer first?
The rubber adhesive bonds directly to clean, dry concrete, metal, and wood; a primer is only needed on porous or dusty surfaces for maximum hold.
Will the coarse 60 grit surface damage the finish on older aluminum stair nosings I plan to keep?
The coarse abrasive grade grips aggressively, so contact with bare aluminum finishes will cause visible scratching over time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
