We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White double-sided foam tape roll 3/4 inch wide five yards long 1/32 inch thick

3M

3M 4032 Double-Sided Foam Tape 3/4 in W 5 yd L 1/32 in

SKU CH-23MG-45FZP

Double-sided acrylic foam tape bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone and wood indoors or outdoors from 50 to 220 °F

  • ColorNatural White
  • Double-sided acrylic adhesive bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone and wood
  • 1/32 in thick polyurethane foam conforms to uneven surfaces for strong indoor and outdoor mounting
  • Continuous 5 yd roll at 3/4 in width lets you cut exact lengths without waste
  • Performs reliably from 50 °F to 220 °F in assembly, construction, maintenance and warehouse tasks
  • Liner included for clean handling and easy application on every project

3M 4032 Double-Sided Foam Tape

This 3M 4032 double-sided foam tape uses an acrylic adhesive on a polyurethane foam carrier. It comes in a natural white colour with a liner included. The roll measures 3/4 in wide by 5 yd long. It suits assembly, manufacturing, construction, maintenance, metalworking and warehouse tasks both indoors and outdoors.

Operating temperature range 50 to 220 °F

The tape performs continuously between a minimum of 50 °F and a maximum of 220 °F. Within this window the acrylic adhesive maintains its bond on the listed surfaces. No thermal throttling or noise considerations apply to this passive product. Power draw is not relevant.

Sustained load on compatible substrates

Under sustained load the foam carrier distributes stress across ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone and wood. The acrylic adhesive resists creep at the rated temperature limits. It is not designed for structural loads beyond the manufacturer’s performance specifications. Buyers needing a wider roll or a different adhesive chemistry should select another product.

Highlights

  • Double-sided acrylic adhesive bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone and wood
  • 1/32 in thick polyurethane foam conforms to uneven surfaces for strong indoor and outdoor mounting
  • Continuous 5 yd roll at 3/4 in width lets you cut exact lengths without waste
  • Performs reliably from 50 °F to 220 °F in assembly, construction, maintenance and warehouse tasks
  • Liner included for clean handling and easy application on every project

Specifications

Brand3M
ColorNatural White

Questions about this item

How do I apply the 3M 4032 tape correctly, and what step do people often skip?

Clean both surfaces thoroughly, remove the liner, then press the tape firmly across its full 3/4 in width so the acrylic adhesive bonds to materials like metal, glass or polycarbonate; skipping the liner removal or pressing too lightly causes weak adhesion.

When will the 3M 4032 tape need replacement?

Replace the roll once the 5 yd length is used; the acrylic adhesive on the polyurethane foam does not dry out, but performance drops if the tape is kept above 220 °F or below 50 °F, so store it within that range.

What is the first limit the 3M 4032 tape hits during sustained use?

The maximum continuous performance temperature of 220 °F is reached first; above this the acrylic adhesive on the foam can soften and lose holding power on surfaces such as ABS, concrete or wood.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.