We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White double-sided foam tape roll on a liner

3M

3M 4032 Double-Sided Foam Tape 1/4 in W 5 yd L 1/32 in Polyurethane Foam

SKU CH-HYRA-FAK2S

Double-sided acrylic foam tape bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone and wood from 50 to 220 °F

  • ColorNatural White
  • Holds firmly across 50–220 °F with acrylic adhesive
  • Bonds ABS, acrylic, concrete, glass, metal and more
  • Polyurethane foam conforms to uneven surfaces for reliable contact
  • Continuous 5-yard roll cuts to exact lengths needed
  • Series 4032 specification for consistent assembly performance

Double-Sided Foam Tape Series 4032

3M 4032 is a polyurethane foam tape with acrylic adhesive on both sides. It comes in a continuous roll measuring 1/4 inch wide by 5 yards long and 1/32 inch thick. The tape suits assembly, manufacturing, maintenance, metalworking and warehouse tasks. It bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone and wood surfaces. A liner is included for handling.

Liner Removal and Surface Preparation

The liner protects the adhesive until application and peels away by hand. Clean each surface so it is dry and free of dust, oil or loose particles before pressing the tape into place. Firm, even pressure across the full bond area improves contact. Cold surfaces below 50 °F or hot surfaces above 220 °F can reduce initial tack and long-term hold. Rough or porous substrates may need extra pressure or a primer not supplied with this roll.

Temperature and Dimensional Limits

The acrylic adhesive performs continuously between 50 °F and 220 °F; outside this range bond strength can decline. The 1/32 inch foam thickness sets a fixed gap between joined parts and limits conformity to highly irregular surfaces. The 1/4 inch width restricts the total load the bond can carry. The 5 yard roll length defines the maximum continuous run available from a single package.

Highlights

  • Holds firmly across 50–220 °F with acrylic adhesive
  • Bonds ABS, acrylic, concrete, glass, metal and more
  • Polyurethane foam conforms to uneven surfaces for reliable contact
  • Continuous 5-yard roll cuts to exact lengths needed
  • Series 4032 specification for consistent assembly performance

Specifications

Brand3M
ColorNatural White

Questions about this item

How can I confirm the 3M 4032 tape is bonding properly after application?

Press the bonded surfaces firmly together and allow the acrylic adhesive to cure; the tape performs reliably between 50 and 220 degrees Fahrenheit, so it should hold securely within that temperature range.

What comes in the box and do I need to buy a liner separately?

The roll includes a liner already applied to the foam tape, so no separate liner purchase is needed for the 1/4 inch by 5 yard continuous roll.

Which 4032 series width and length should I choose for my project?

This listing provides the 1/4 inch width and 5 yard length; select this version when you need a narrow, continuous roll for general assembly or repair tasks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.