3M
3M 310-6X60 Anti-Slip Tape 6 in 60 ft 45 mil
Anti-slip tape roll, 6 inches by 60 feet, 45 mil thick, rubber adhesive, indoor and outdoor use
- Anti-slip surface for indoor and outdoor safety
- 6-inch width covers steps and walkways efficiently
- 60-foot roll provides long continuous coverage
- 45-mil thickness resists wear in high-traffic areas
- Rubber adhesive bonds securely to multiple substrates
Anti-Slip Tape 6 in 60 ft
This 3M Safety Walk tape provides traction on indoor and outdoor surfaces. The 45 mil thickness and proprietary grit size create a durable walking surface. Black colouring blends with many floor types. Rubber adhesive bonds to clean, dry substrates.
Sustained traction in wet and dry conditions
The tape maintains grip across temperature changes and moisture exposure. Non-abrasive grade reduces wear on footwear while resisting peeling under foot traffic. Fluorescent and glow-in-the-dark additives are absent for consistent appearance. Suitable for stairs, ramps and walkways.
Simple peel-and-stick application
Clean the surface thoroughly before applying to prevent adhesion failure. Press firmly along the full 60 ft length to eliminate air pockets. Misalignment during installation is the most common issue and cannot be corrected once the rubber adhesive sets. No special tools required.
Highlights
- Anti-slip surface for indoor and outdoor safety
- 6-inch width covers steps and walkways efficiently
- 60-foot roll provides long continuous coverage
- 45-mil thickness resists wear in high-traffic areas
- Rubber adhesive bonds securely to multiple substrates
Specifications
| Brand | 3M |
|---|
Questions about this item
Does the 45 mil tape thickness trap heat on metal surfaces in full sun?
The 45 mil construction is a thin synthetic rubber and plastic film; it does not insulate enough to raise surface temperature under normal outdoor exposure.
What surface preparation is needed before the rubber adhesive will bond?
Clean the area to remove oil, dust and loose paint; the rubber adhesive bonds to wood, concrete, metal and most painted surfaces without primer.
Can the 300 series Safety Walk tape be applied over existing non-slip coating without lifting?
Yes, the rubber adhesive adheres to cured non-slip coatings if the old layer is sound, clean and lightly abraded for mechanical grip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
