3M
3M 2097 P100 Particulate Odor Filter 2-pairs Pink
NIOSH-approved P100 filters capture 99.97% of particles and reduce nuisance organic vapour odours for 3M 6000, 6500, 7500 and 6297 respirators
- TypeWith Tape
- NIOSH-approved P100 filters capture 99.97% of solid and liquid aerosols
- Carbon layer reduces odor of nuisance organic vapors below exposure limits
- Twist-on fit for 3M 6000, 6500 and 7500 series facepieces
- Replacement filters for 3M 6297 Lead Paint Removal Respirator
- Pack contains two pairs of pink P100 particulate odor filters
P100 particulate filter for lead and renovation work
The 3M 2097 P100 Particulate + Odor Filters are NIOSH-approved replacement cartridges rated at 99.97% filtration efficiency against solid and liquid aerosols, including oil-based particles. They are designed for tasks such as lead paint removal, sanding, scraping and demolition where fine dust is present. A carbon layer helps reduce the odor of nuisance organic vapors below permissible exposure limits. These filters do not protect against gases, chemical vapors or paint fumes.
Check 6000, 6500 or 7500 series facepiece
Before ordering, confirm that your reusable respirator is a 3M 6000, 6500 or 7500 series facepiece, as these filters attach with a simple twist to those models only. They are also the specified replacement for the 3M 6297 Lead Paint Removal Respirator. Verify that the filter housing is clean and the bayonet tabs are undamaged so the seal seats correctly. Replace filters when they become dirty, damaged or breathing resistance increases noticeably.
Upgrade from basic particulate filters without
These 2097 filters replace standard P100 cartridges that lack a carbon layer, adding nuisance odor reduction for organic vapors such as solvents, degreasers and resins during long jobs. The jump is worth it when odor discomfort affects work endurance but contaminant levels remain below OSHA limits, so a full chemical cartridge is not required. They are not for buyers who need protection against gases or vapors above nuisance levels, or who use facepieces outside the 6000, 6500 and 7500 series.
Highlights
- NIOSH-approved P100 filters capture 99.97% of solid and liquid aerosols
- Carbon layer reduces odor of nuisance organic vapors below exposure limits
- Twist-on fit for 3M 6000, 6500 and 7500 series facepieces
- Replacement filters for 3M 6297 Lead Paint Removal Respirator
- Pack contains two pairs of pink P100 particulate odor filters
Specifications
| Type | With Tape |
|---|
Questions about this item
What comes in the package and which respirator facepieces are compatible?
The pack contains two pairs of 2097 P100 filters with a carbon layer. They twist onto 3M 6000, 6500 and 7500 series facepieces and are the replacement filters for the 6297 Lead Paint Removal Respirator.
How do I decide between these and a cartridge rated for organic vapours?
These filters give 99.97% particulate efficiency plus nuisance-level odor relief only; they do not protect against organic vapours, paint fumes or any gas. Choose a dedicated vapour cartridge when exposure exceeds nuisance levels.
What does the 99.97% filtration figure mean on a real job site?
It means the filter meets NIOSH P100 requirements, capturing at least 99.97% of solid and liquid aerosols including oil-based particles, so fine dust from sanding, scraping or demolition is largely stopped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
