We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue P95 bayonet disk filter pair for 3M respirators

3M

3M 2071 P95 Bayonet Filter Personal Protective Equipment

SKU CH-YG70-HY1K3

P95-rated bayonet filter compatible with 3M 5000, 6000, 7000 and FF-400 series respirators, pack of two

  • TypeRespiratory Protection
  • NIOSH P95 rating blocks at least 95% of oil and non-oil particles
  • Bayonet connection fits 3M 5000, 6000, 7000 and FF-400 series respirators
  • Air-purifying cartridge design removes airborne contaminants before you breathe them
  • Two filters per pack provide a ready spare for continuous protection
  • Blue colour coding allows quick identification of P95 rating in the field

3M 2071 P95 Bayonet Filter

This NIOSH-approved P95 filter captures at least 95 percent of airborne particles and oil-based aerosols. It uses a bayonet connection that locks onto 3M 5000, 6000 and 7000 series facepieces as well as the FF-400 series. The blue housing identifies the P95 rating at a glance. Supplied in a pack of two for immediate replacement.

Thermals noise and power

Passive filtration produces no heat, noise or electrical draw during normal wear. Breathing resistance remains low so the wearer does not experience added thermal load from the filter itself. The lightweight disk adds minimal mass to the respirator assembly. No external power source is required for operation.

Sustained load behaviour

Under continuous exposure the filter media loads gradually, increasing breathing resistance until the service limit is reached. NIOSH P95 certification confirms performance against oil aerosols for the rated service time. Replace both filters when breathing becomes difficult or according to your site respiratory programme. The bayonet mount stays secure throughout extended shifts.

Highlights

  • NIOSH P95 rating blocks at least 95% of oil and non-oil particles
  • Bayonet connection fits 3M 5000, 6000, 7000 and FF-400 series respirators
  • Air-purifying cartridge design removes airborne contaminants before you breathe them
  • Two filters per pack provide a ready spare for continuous protection
  • Blue colour coding allows quick identification of P95 rating in the field

Specifications

Brand3M
TypeRespiratory Protection

Questions about this item

How do I install the 2071 filter on my 5000 series respirator and what step do people often miss?

Align the bayonet lugs, twist until the filter clicks into the locked position, then perform a user seal check before entering the work area.

When should I replace the 2071 P95 filter during regular use?

Replace the filter when breathing resistance becomes uncomfortable, if the filter is damaged or soiled, or after 40 hours of oil aerosol exposure.

What limits how long I can wear the 2071 filter continuously in a hot environment?

Heat and humidity inside the facepiece increase breathing resistance and discomfort, which typically limits continuous wear before a break is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.