We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare copper ring terminals, #10 stud, 16-14 AWG, pack of 1000

3M

3M 16-14 AWG Non-Insulated Ring Terminal #10 Stud Pack of 1000

SKU CH-M2HW-Z8JH8

Non-insulated ring terminals for 16-14 AWG wire with #10 stud, brazed seam, copper construction, 600 V rating, 1000-piece pack

  • Brazed seam resists pull-out on 16-14 AWG wire
  • #10 stud fits common automotive and marine bolts
  • 600 V rating handles standard low-voltage circuits
  • 347 °F max temperature suits engine-bay heat
  • 1 000-piece bulk pack covers large wiring jobs

16-14 AWG Ring Terminals for #10 Stud

These 3M non-insulated ring terminals accept 16 to 14 AWG wire and fit a #10 stud. The pack contains 1000 pieces for high-volume electrical work. Copper construction with a brazed seam provides a reliable crimp connection. They are UL listed and CSA certified for 600 V maximum voltage.

Crimp Installation With Basic Tools

A standard crimp tool for non-insulated terminals is required to secure the wire. The bare copper barrel has no insulation sleeve, so the crimp must fully compress the brazed seam without cracking it. Over-crimping can split the barrel while under-crimping leaves a loose connection. No soldering or heating is needed for a proper joint.

1000-Piece Bulk Pack for High-Volume Jobs

The 1000-terminal quantity supports large wiring harnesses, panel builds or fleet maintenance. Each terminal handles up to 600 V and 347 °F, suitable for standard automotive and industrial circuits. The 0.31 in tongue width fits #10 studs but will not accommodate larger bolt sizes. Buyers needing insulated barrels or different stud sizes must select another product.

Highlights

  • Brazed seam resists pull-out on 16-14 AWG wire
  • #10 stud fits common automotive and marine bolts
  • 600 V rating handles standard low-voltage circuits
  • 347 °F max temperature suits engine-bay heat
  • 1 000-piece bulk pack covers large wiring jobs

Specifications

Brand3M

Questions about this item

How can I verify the 16-14 AWG ring terminals are crimped correctly after installation?

After crimping, pull firmly on the wire to confirm mechanical hold and inspect the brazed seam for a uniform, gap-free closure around the #10 stud hole.

What comes in the pack and are any crimp tools or insulation sleeves included?

The box contains 1000 bare copper ring terminals with .31 in tongue width and .74 in overall length; crimp tools and heat-shrink sleeves are sold separately.

Which stud size and wire range should I select for a #10 bolt on 16-14 AWG automotive wiring?

Choose the #10 stud version rated for 16-14 AWG, 600 V and 347 °F maximum temperature to match the bolt and wire gauge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.